AVFrame是包含码流参数较多的结构体。下面我们来分析一下该结构体里重要变量的含义和作用。 # 一、源码整理 首先我们先看一下结构体AVFrame的定义的结构体源码(位于libavcodec/avcodec.h)： ``` /* *雷霄骅 *leixiaohua1020@126.com *中国传媒大学/数字电视技术 */ /** * Audio Video Frame. * New fields can be added to the end of AVFRAME with minor version * bumps. Similarly fields that are marked as to be only accessed by * av_opt_ptr() can be reordered. This allows 2 forks to add fields * without breaking compatibility with each other. * Removal, reordering and changes in the remaining cases require * a major version bump. * sizeof(AVFrame) must not be used outside libavcodec. */ typedef struct AVFrame { #define AV_NUM_DATA_POINTERS 8 /**图像数据 * pointer to the picture/channel planes. * This might be different from the first allocated byte * - encoding: Set by user * - decoding: set by AVCodecContext.get_buffer() */ uint8_t *data[AV_NUM_DATA_POINTERS]; /** * Size, in bytes, of the data for each picture/channel plane. * * For audio, only linesize[0] may be set. For planar audio, each channel * plane must be the same size. * * - encoding: Set by user * - decoding: set by AVCodecContext.get_buffer() */ int linesize[AV_NUM_DATA_POINTERS]; /** * pointers to the data planes/channels. * * For video, this should simply point to data[]. * * For planar audio, each channel has a separate data pointer, and * linesize[0] contains the size of each channel buffer. * For packed audio, there is just one data pointer, and linesize[0] * contains the total size of the buffer for all channels. * * Note: Both data and extended_data will always be set by get_buffer(), * but for planar audio with more channels that can fit in data, * extended_data must be used by the decoder in order to access all * channels. * * encoding: unused * decoding: set by AVCodecContext.get_buffer() */ uint8_t **extended_data; /**宽高 * width and height of the video frame * - encoding: unused * - decoding: Read by user. */ int width, height; /** * number of audio samples (per channel) described by this frame * - encoding: Set by user * - decoding: Set by libavcodec */ int nb_samples; /** * format of the frame, -1 if unknown or unset * Values correspond to enum AVPixelFormat for video frames, * enum AVSampleFormat for audio) * - encoding: unused * - decoding: Read by user. */ int format; /**是否是关键帧 * 1 -> keyframe, 0-> not * - encoding: Set by libavcodec. * - decoding: Set by libavcodec. */ int key_frame; /**帧类型（I,B,P） * Picture type of the frame, see ?_TYPE below. * - encoding: Set by libavcodec. for coded_picture (and set by user for input). * - decoding: Set by libavcodec. */ enum AVPictureType pict_type; /** * pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer. * This isn't used by libavcodec unless the default get/release_buffer() is used. * - encoding: * - decoding: */ uint8_t *base[AV_NUM_DATA_POINTERS]; /** * sample aspect ratio for the video frame, 0/1 if unknown/unspecified * - encoding: unused * - decoding: Read by user. */ AVRational sample_aspect_ratio; /** * presentation timestamp in time_base units (time when frame should be shown to user) * If AV_NOPTS_VALUE then frame_rate = 1/time_base will be assumed. * - encoding: MUST be set by user. * - decoding: Set by libavcodec. */ int64_t pts; /** * reordered pts from the last AVPacket that has been input into the decoder * - encoding: unused * - decoding: Read by user. */ int64_t pkt_pts; /** * dts from the last AVPacket that has been input into the decoder * - encoding: unused * - decoding: Read by user. */ int64_t pkt_dts; /** * picture number in bitstream order * - encoding: set by * - decoding: Set by libavcodec. */ int coded_picture_number; /** * picture number in display order * - encoding: set by * - decoding: Set by libavcodec. */ int display_picture_number; /** * quality (between 1 (good) and FF_LAMBDA_MAX (bad)) * - encoding: Set by libavcodec. for coded_picture (and set by user for input). * - decoding: Set by libavcodec. */ int quality; /** * is this picture used as reference * The values for this are the same as the MpegEncContext.picture_structure * variable, that is 1->top field, 2->bottom field, 3->frame/both fields. * Set to 4 for delayed, non-reference frames. * - encoding: unused * - decoding: Set by libavcodec. (before get_buffer() call)). */ int reference; /**QP表 * QP table * - encoding: unused * - decoding: Set by libavcodec. */ int8_t *qscale_table; /** * QP store stride * - encoding: unused * - decoding: Set by libavcodec. */ int qstride; /** * */ int qscale_type; /**跳过宏块表 * mbskip_table[mb]>=1 if MB didn't change * stride= mb_width = (width+15)>>4 * - encoding: unused * - decoding: Set by libavcodec. */ uint8_t *mbskip_table; /**运动矢量表 * motion vector table * @code * example: * int mv_sample_log2= 4 - motion_subsample_log2; * int mb_width= (width+15)>>4; * int mv_stride= (mb_width << mv_sample_log2) + 1; * motion_val[direction][x + y*mv_stride][0->mv_x, 1->mv_y]; * @endcode * - encoding: Set by user. * - decoding: Set by libavcodec. */ int16_t (*motion_val[2])[2]; /**宏块类型表 * macroblock type table * mb_type_base + mb_width + 2 * - encoding: Set by user. * - decoding: Set by libavcodec. */ uint32_t *mb_type; /**DCT系数 * DCT coefficients * - encoding: unused * - decoding: Set by libavcodec. */ short *dct_coeff; /**参考帧列表 * motion reference frame index * the order in which these are stored can depend on the codec. * - encoding: Set by user. * - decoding: Set by libavcodec. */ int8_t *ref_index[2]; /** * for some private data of the user * - encoding: unused * - decoding: Set by user. */ void *opaque; /** * error * - encoding: Set by libavcodec. if flags&CODEC_FLAG_PSNR. * - decoding: unused */ uint64_t error[AV_NUM_DATA_POINTERS]; /** * type of the buffer (to keep track of who has to deallocate data[*]) * - encoding: Set by the one who allocates it. * - decoding: Set by the one who allocates it. * Note: User allocated (direct rendering) & internal buffers cannot coexist currently. */ int type; /** * When decoding, this signals how much the picture must be delayed. * extra_delay = repeat_pict / (2*fps) * - encoding: unused * - decoding: Set by libavcodec. */ int repeat_pict; /** * The content of the picture is interlaced. * - encoding: Set by user. * - decoding: Set by libavcodec. (default 0) */ int interlaced_frame; /** * If the content is interlaced, is top field displayed first. * - encoding: Set by user. * - decoding: Set by libavcodec. */ int top_field_first; /** * Tell user application that palette has changed from previous frame. * - encoding: ??? (no palette-enabled encoder yet) * - decoding: Set by libavcodec. (default 0). */ int palette_has_changed; /** * codec suggestion on buffer type if != 0 * - encoding: unused * - decoding: Set by libavcodec. (before get_buffer() call)). */ int buffer_hints; /** * Pan scan. * - encoding: Set by user. * - decoding: Set by libavcodec. */ AVPanScan *pan_scan; /** * reordered opaque 64bit (generally an integer or a double precision float * PTS but can be anything). * The user sets AVCodecContext.reordered_opaque to represent the input at * that time, * the decoder reorders values as needed and sets AVFrame.reordered_opaque * to exactly one of the values provided by the user through AVCodecContext.reordered_opaque * @deprecated in favor of pkt_pts * - encoding: unused * - decoding: Read by user. */ int64_t reordered_opaque; /** * hardware accelerator private data (FFmpeg-allocated) * - encoding: unused * - decoding: Set by libavcodec */ void *hwaccel_picture_private; /** * the AVCodecContext which ff_thread_get_buffer() was last called on * - encoding: Set by libavcodec. * - decoding: Set by libavcodec. */ struct AVCodecContext *owner; /** * used by multithreading to store frame-specific info * - encoding: Set by libavcodec. * - decoding: Set by libavcodec. */ void *thread_opaque; /** * log2 of the size of the block which a single vector in motion_val represents: * (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2) * - encoding: unused * - decoding: Set by libavcodec. */ uint8_t motion_subsample_log2; /**（音频）采样率 * Sample rate of the audio data. * * - encoding: unused * - decoding: read by user */ int sample_rate; /** * Channel layout of the audio data. * * - encoding: unused * - decoding: read by user. */ uint64_t channel_layout; /** * frame timestamp estimated using various heuristics, in stream time base * Code outside libavcodec should access this field using: * av_frame_get_best_effort_timestamp(frame) * - encoding: unused * - decoding: set by libavcodec, read by user. */ int64_t best_effort_timestamp; /** * reordered pos from the last AVPacket that has been input into the decoder * Code outside libavcodec should access this field using: * av_frame_get_pkt_pos(frame) * - encoding: unused * - decoding: Read by user. */ int64_t pkt_pos; /** * duration of the corresponding packet, expressed in * AVStream->time_base units, 0 if unknown. * Code outside libavcodec should access this field using: * av_frame_get_pkt_duration(frame) * - encoding: unused * - decoding: Read by user. */ int64_t pkt_duration; /** * metadata. * Code outside libavcodec should access this field using: * av_frame_get_metadata(frame) * - encoding: Set by user. * - decoding: Set by libavcodec. */ AVDictionary *metadata; /** * decode error flags of the frame, set to a combination of * FF_DECODE_ERROR_xxx flags if the decoder produced a frame, but there * were errors during the decoding. * Code outside libavcodec should access this field using: * av_frame_get_decode_error_flags(frame) * - encoding: unused * - decoding: set by libavcodec, read by user. */ int decode_error_flags; #define FF_DECODE_ERROR_INVALID_BITSTREAM 1 #define FF_DECODE_ERROR_MISSING_REFERENCE 2 /** * number of audio channels, only used for audio. * Code outside libavcodec should access this field using: * av_frame_get_channels(frame) * - encoding: unused * - decoding: Read by user. */ int64_t channels; } AVFrame; ``` # 二、AVFrame 重点字段 AVFrame结构体一般用于存储原始数据（即非压缩数据，例如对视频来说是YUV，RGB，对音频来说是PCM），此外还包含了一些相关的信息。比如说，解码的时候存储了宏块类型表，QP表，运动矢量表等数据。编码的时候也存储了相关的数据。因此在使用FFMPEG进行码流分析的时候，AVFrame是一个很重要的结构体。 下面看几个主要变量的作用（在这里考虑解码的情况）： ``` uint8_t *data[AV_NUM_DATA_POINTERS]：解码后原始数据（对视频来说是YUV，RGB，对音频来说是PCM） int linesize[AV_NUM_DATA_POINTERS]：data中“一行”数据的大小。注意：未必等于图像的宽，一般大于图像的宽。 int width, height：视频帧宽和高（1920x1080,1280x720...） int nb_samples：音频的一个AVFrame中可能包含多个音频帧，在此标记包含了几个 int format：解码后原始数据类型（YUV420，YUV422，RGB24...） int key_frame：是否是关键帧 enum AVPictureType pict_type：帧类型（I,B,P...） AVRational sample_aspect_ratio：宽高比（16:9，4:3...） int64_t pts：显示时间戳 int coded_picture_number：编码帧序号 int display_picture_number：显示帧序号 int8_t *qscale_table：QP表 uint8_t *mbskip_table：跳过宏块表 int16_t (*motion_val[2])[2]：运动矢量表 uint32_t *mb_type：宏块类型表 short *dct_coeff：DCT系数，这个没有提取过 int8_t *ref_index[2]：运动估计参考帧列表（貌似H.264这种比较新的标准才会涉及到多参考帧） int interlaced_frame：是否是隔行扫描 uint8_t motion_subsample_log2：一个宏块中的运动矢量采样个数，取log的 ``` 其他的变量不再一一列举，源代码中都有详细的说明。在这里重点分析一下几个需要一定的理解的变量： ### 1.data[] 对于packed格式的数据（例如RGB24），会存到data[0]里面。 对于planar格式的数据（例如YUV420P），则会分开成data[0]，data[1]，data[2]...（YUV420P中data[0]存Y，data[1]存U，data[2]存V） ### 2.pict_type 包含以下类型： ``` enum AVPictureType { AV_PICTURE_TYPE_NONE = 0, ///< Undefined AV_PICTURE_TYPE_I, ///< Intra AV_PICTURE_TYPE_P, ///< Predicted AV_PICTURE_TYPE_B, ///< Bi-dir predicted AV_PICTURE_TYPE_S, ///< S(GMC)-VOP MPEG4 AV_PICTURE_TYPE_SI, ///< Switching Intra AV_PICTURE_TYPE_SP, ///< Switching Predicted AV_PICTURE_TYPE_BI, ///< BI type }; ``` ### 3.sample_aspect_ratio 宽高比是一个分数，FFMPEG中用AVRational表达分数： ``` /** * rational number numerator/denominator */ typedef struct AVRational{ int num; ///< numerator int den; ///< denominator } AVRational; ``` ### 4.qscale_table QP表指向一块内存，里面存储的是每个宏块的QP值。宏块的标号是从左往右，一行一行的来的。每个宏块对应1个QP。 qscale_table[0]就是第1行第1列宏块的QP值；qscale_table[1]就是第1行第2列宏块的QP值；qscale_table[2]就是第1行第3列宏块的QP值。以此类推... 宏块的个数用下式计算： 注：宏块大小是16x16的。 每行宏块数： ``` int mb_stride = pCodecCtx->width/16+1 ``` 宏块的总数： ``` int mb_sum = ((pCodecCtx->height+15)>>4)*(pCodecCtx->width/16+1) ```