diff --git a/config/backup.conf b/config/backup.conf new file mode 100644 index 0000000..92c7c53 --- /dev/null +++ b/config/backup.conf @@ -0,0 +1,63 @@ +# ----------------------------------- +# 警告...请不要修改或删除这个文件...谢谢 +# 警告...请不要修改或删除这个文件...谢谢 +# 警告...请不要修改或删除这个文件...谢谢 +# ----------------------------------- + +# ---- 再次提醒 ---- +# 大胸弟...如果你看到了这个...记得不要修改或更改这个文件 + +# ---- 说明 ---- +# 嗯……这个文件呢，是用来备份一些设置的 +# 我懒...不想用 JQ 去解析 JSON.... +# 那就把 V2Ray 配置文件的一些重要参数提取出来 +# 然后..在修改 V2Ray 配置的时候再重写一下就 OK 啦... +# 嗯…笨笨的方法 + +# ---- V2Ray 传输协议 ----- +v2ray_transport=1 + +#---- V2Ray 端口 ----- +v2ray_port=2333 + +#---- UUID ----- +v2ray_id=23332333-2333-2333-2333-233boy233boy + +#---- alterId ----- +alterId=233 + +#---- V2Ray 动态端口开始 ----- +v2ray_dynamicPort_start=10000 + +#---- V2Ray 动态端口结束 ----- +v2ray_dynamicPort_end=20000 + +#---- 域名 ----- +domain=233blog.com + +#---- caddy ----- +caddy_status= + +#---- Shadowsocks ----- +shadowsocks_status= + +#---- Shadowsocks 端口 ----- +ssport=6666 + +#---- Shadowsocks 密码 ----- +sspass=233blog.com + +#---- Shadowsocks 加密协议 ----- +ssciphers=chacha20-ietf + +#---- 屏蔽广告 ----- +blocked_ad_status= + +#---- 网站伪装 ----- +ws_path_status= + +#---- 伪装的路径 ----- +ws_path=233blog + +#---- 伪装的网址 ----- +proxy_site=https://liyafly.com diff --git a/config/backup.txt b/config/backup.txt deleted file mode 100644 index f5d9589..0000000 --- a/config/backup.txt +++ /dev/null @@ -1,47 +0,0 @@ ------------------------------------ -警告...请不要修改或删除这个文件...谢谢 -警告...请不要修改或删除这个文件...谢谢 -警告...请不要修改或删除这个文件...谢谢 ------------------------------------ - ----- 再次提醒 ---- -大胸弟...如果你看到了这个...记得不要修改或更改这个文件 - ----- 说明 ---- -嗯……这个文件呢，是用来备份一些设置的 -我懒...不想用 JQ 去解析 JSON.... -那就把 V2Ray 配置文件的一些重要参数提取出来 -然后..在修改 V2Ray 配置的时候再重写一下就 OK 啦... -嗯…笨笨的方法 ----- V2Ray 传输协议 ----- -1 ----- V2Ray 端口 ----- -2333 ----- UUID ----- -23332333-2333-2333-2333-233boy233boy ----- V2Ray 动态端口开始 ----- -10000 ----- V2Ray 动态端口结束 ----- -20000 ----- 域名 ----- -233blog.com ----- caddy ----- -false ----- Shadowsocks ----- -false ----- Shadowsocks 端口 ----- -6666 ----- Shadowsocks 密码 ----- -233blog.com ----- Shadowsocks 加密协议 ----- -chacha20-ietf ----- 屏蔽广告 ----- -false ----- 网站伪装 ----- -false ----- 伪装的路径 ----- -233blog ----- alterId ----- -233 ----- 伪装的网址 ----- -https://liyafly.com \ No newline at end of file diff --git a/config/client/h2.json b/config/client/h2.json new file mode 100644 index 0000000..4d5d4fc --- /dev/null +++ b/config/client/h2.json @@ -0,0 +1,115 @@ +{ + "log": { + "error": "error.log", + "loglevel": "warning" + }, + "inbound": { + "port": 2333, + "listen": "127.0.0.1", + "protocol": "socks", + "settings": { + "auth": "noauth", + "udp": true, + "ip": "127.0.0.1" + } + }, + "outbound": { + "protocol": "vmess", + "settings": { + "vnext": [ + { + "address": "233blog.com", + "port": 2333, + "users": [ + { + "id": "23332333-2333-2333-2333-233boy233boy", + "alterId": 233, + "security": "auto" + } + ] + } + ] + }, + "streamSettings": { + "network": "h2", + "security": "tls", + "tlsSettings": { + "serverName": "233blog.com", + "allowInsecure": false + }, + "httpSettings": { + "path": "/233blog" + } + }, + "mux": { + "enabled": true + } + }, + "inboundDetour": [ + { + "port": 6666, + "listen": "127.0.0.1", + "protocol": "http", + "settings": { + "auth": "noauth", + "udp": true, + "ip": "127.0.0.1" + } + } + ], + "outboundDetour": [ + { + "protocol": "freedom", + "settings": {}, + "tag": "direct" + } + ], + "dns": { + "servers": [ + "8.8.8.8", + "8.8.4.4", + "localhost" + ] + }, + "routing": { + "strategy": "rules", + "settings": { + "domainStrategy": "IPIfNonMatch", + "rules": [ + { + "type": "field", + "ip": [ + "0.0.0.0/8", + "10.0.0.0/8", + "100.64.0.0/10", + "127.0.0.0/8", + "169.254.0.0/16", + "172.16.0.0/12", + "192.0.0.0/24", + "192.0.2.0/24", + "192.168.0.0/16", + "198.18.0.0/15", + "198.51.100.0/24", + "203.0.113.0/24", + "::1/128", + "fc00::/7", + "fe80::/10", + "geoip:cn" + ], + "domain": [ + "geosite:cn" + ], + "outboundTag": "direct" + }, + { + "type": "chinasites", + "outboundTag": "direct" + }, + { + "type": "chinaip", + "outboundTag": "direct" + } + ] + } + } +} \ No newline at end of file diff --git a/install.sh b/install.sh index 00b2a78..1956ffb 100644 --- a/install.sh +++ b/install.sh @@ -44,7 +44,7 @@ uuid=$(cat /proc/sys/kernel/random/uuid) old_id="23332333-2333-2333-2333-233boy233boy" v2ray_server_config="/etc/v2ray/config.json" v2ray_client_config="/etc/v2ray/233blog_v2ray_config.json" -backup="/etc/v2ray/233blog_v2ray_backup.txt" +backup="/etc/v2ray/233blog_v2ray_backup.conf" transport=( TCP @@ -394,9 +394,9 @@ ws_path_config() { [[ -z $ws_path ]] && ws_path="233blog" case $ws_path in - */*) + *[/$]*) echo - echo -e " 由于这个脚本太辣鸡了..所以不能包含 $red/$none 这个符号.... " + echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... " echo error ;; @@ -424,6 +424,12 @@ proxy_site_config() { [[ -z $proxy_site ]] && proxy_site="https://liyafly.com" case $proxy_site in + *[#$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含$red # $none或$red $ $none这两个符号.... " + echo + error + ;; *) echo echo @@ -546,9 +552,9 @@ shadowsocks_password_config() { read -p "$(echo -e "(默认密码: ${cyan}233blog.com$none)"): " sspass [ -z "$sspass" ] && sspass="233blog.com" case $sspass in - */*) + *[/$]*) echo - echo -e " 由于这个脚本太辣鸡了..所以密码不能包含 $red/$none 这个符号.... " + echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... " echo error ;; @@ -791,7 +797,7 @@ install_v2ray() { mkdir -p /etc/v2ray/233boy/v2ray cp -rf $(pwd)/* /etc/v2ray/233boy/v2ray else - git clone https://github.com/233boy/v2ray /etc/v2ray/233boy/v2ray + git clone -b test https://github.com/233boy/v2ray /etc/v2ray/233boy/v2ray fi [ -d /tmp/v2ray ] && rm -rf /tmp/v2ray @@ -1041,9 +1047,14 @@ del_port() { # fi else # if [[ $cmd == "apt-get" ]]; then - local port_start=$(sed -n '23p' $backup) - local port_end=$(sed -n '25p' $backup) - local ports="${port_start}:${port_end}" + if [[ $v2ray_transport ]]; then + local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}" + else + local port_start=$(sed -n '23p' $backup) + local port_end=$(sed -n '25p' $backup) + local ports="${port_start}:${port_end}" + fi + iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT @@ -1070,7 +1081,7 @@ del_port() { config() { cp -f $v2ray_server_config_file $v2ray_server_config cp -f $v2ray_client_config_file $v2ray_client_config - cp -f /etc/v2ray/233boy/v2ray/config/backup.txt $backup + cp -f /etc/v2ray/233boy/v2ray/config/backup.conf $backup cp -f /etc/v2ray/233boy/v2ray/v2ray.sh /usr/local/bin/v2ray chmod +x /usr/local/bin/v2ray @@ -1220,19 +1231,19 @@ config() { } backup_config() { - sed -i "17s/1/$v2ray_transport_opt/; 19s/2333/$v2ray_port/; 21s/$old_id/$uuid/;" $backup + sed -i "18s/=1/=$v2ray_transport_opt/; 21s/=2333/=$v2ray_port/; 24s/=$old_id/=$uuid/" $backup if [ $v2ray_transport_opt -ge 9 ]; then - sed -i "23s/10000/$v2ray_dynamic_port_start_input/; 25s/20000/$v2ray_dynamic_port_end_input/" $backup + sed -i "30s/=10000/=$v2ray_dynamic_port_start_input/; 33s/=20000/=$v2ray_dynamic_port_end_input/" $backup fi if [ $shadowsocks ]; then - sed -i "31s/false/true/; 33s/6666/$ssport/; 35s/233blog.com/$sspass/; 37s/chacha20-ietf/$ssciphers/" $backup + sed -i "42s/=/=true/; 45s/=6666/=$ssport/; 48s/=233blog.com/=$sspass/; 51s/=chacha20-ietf/=$ssciphers/" $backup fi - [ $v2ray_transport_opt == "4" ] && sed -i "27s/233blog.com/$domain/" $backup - [ $caddy ] && sed -i "29s/false/true/" $backup - [ $is_blocked_ad ] && sed -i "39s/false/true/" $backup + [ $v2ray_transport_opt == "4" ] && sed -i "36s/=233blog.com/=$domain/" $backup + [ $caddy ] && sed -i "39s/=/=true/" $backup + [ $is_blocked_ad ] && sed -i "54s/=/=true/" $backup if [[ $ws_path ]]; then - sed -i "41s/false/true/; 43s/233blog/$ws_path/; $ d" $backup - echo "$proxy_site" >>$backup + sed -i "57s/=/=true/; 60s/=233blog/=$ws_path/" $backup + sed -i "63s#=https://liyafly.com#=$proxy_site#" $backup fi } @@ -1621,6 +1632,13 @@ install() { echo -e " $yellow输入 ${cyan}v2ray${none} $yellow即可管理 V2Ray${none}" echo exit 1 + elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then + echo + echo " 大佬... 如果你需要继续安装.. 请先卸载旧版本" + echo + echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}" + echo + exit 1 fi v2ray_config blocked_hosts @@ -1647,6 +1665,168 @@ install() { uninstall() { if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then + . $backup + while :; do + echo + read -p "$(echo -e "是否卸载 ${yellow}V2Ray$none [${magenta}Y/N$none]:")" uninstall_v2ray_ask + if [[ -z $uninstall_v2ray_ask ]]; then + error + else + case $uninstall_v2ray_ask in + Y | y) + is_uninstall_v2ray=true + echo + echo -e "$yellow 卸载 V2Ray = ${cyan}是${none}" + echo + break + ;; + N | n) + echo + echo -e "$red 卸载已取消...$none" + echo + break + ;; + *) + error + ;; + esac + fi + done + + if [[ $caddy_status ]] && [[ -f /usr/local/bin/caddy && -f /etc/caddy/Caddyfile ]]; then + while :; do + echo + read -p "$(echo -e "是否卸载 ${yellow}Caddy$none [${magenta}Y/N$none]:")" uninstall_caddy_ask + if [[ -z $uninstall_caddy_ask ]]; then + error + else + case $uninstall_caddy_ask in + Y | y) + is_uninstall_caddy=true + echo + echo -e "$yellow 卸载 Caddy = ${cyan}是${none}" + echo + break + ;; + N | n) + echo + echo -e "$yellow 卸载 Caddy = ${cyan}否${none}" + echo + break + ;; + *) + error + ;; + esac + fi + done + fi + + if [[ $is_uninstall_v2ray && $is_uninstall_caddy ]]; then + pause + echo + + if [[ $shadowsocks_status ]]; then + del_port $ssport + fi + + if [[ $v2ray_transport == "4" ]]; then + del_port "80" + del_port "443" + del_port $v2ray_port + elif [[ $v2ray_transport -ge 9 ]]; then + del_port $v2ray_port + del_port "multiport" + else + del_port $v2ray_port + fi + + [ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables + + v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}') + # [ $v2ray_pid ] && systemctl stop v2ray + [ $v2ray_pid ] && do_service stop v2ray + + rm -rf /usr/bin/v2ray + rm -rf /usr/local/bin/v2ray + rm -rf /etc/v2ray + rm -rf /var/log/v2ray + + caddy_pid=$(pgrep "caddy") + # [ $caddy_pid ] && systemctl stop caddy + [ $caddy_pid ] && do_service stop caddy + rm -rf /usr/local/bin/caddy + rm -rf /etc/caddy + rm -rf /etc/ssl/caddy + + if [[ $systemd ]]; then + systemctl disable v2ray >/dev/null 2>&1 + rm -rf /lib/systemd/system/v2ray.service + systemctl disable caddy >/dev/null 2>&1 + rm -rf /lib/systemd/system/caddy.service + else + update-rc.d -f caddy remove >/dev/null 2>&1 + update-rc.d -f v2ray remove >/dev/null 2>&1 + rm -rf /etc/init.d/caddy + rm -rf /etc/init.d/v2ray + fi + + # clear + echo + echo -e "$green V2Ray 卸载完成啦 ....$none" + echo + echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我" + echo + echo "反馈问题: https://github.com/233boy/v2ray/issus" + echo + + elif [[ $is_uninstall_v2ray ]]; then + pause + echo + + if [[ $shadowsocks_status ]]; then + del_port $ssport + fi + + if [[ $v2ray_transport == "4" ]]; then + del_port "80" + del_port "443" + del_port $v2ray_port + elif [[ $v2ray_transport -ge 9 ]]; then + del_port $v2ray_port + del_port "multiport" + else + del_port $v2ray_port + fi + + [ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables + + v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}') + # [ $v2ray_pid ] && systemctl stop v2ray + [ $v2ray_pid ] && do_service stop v2ray + rm -rf /usr/bin/v2ray + rm -rf /usr/local/bin/v2ray + rm -rf /etc/v2ray + rm -rf /var/log/v2ray + if [[ $systemd ]]; then + systemctl disable v2ray >/dev/null 2>&1 + rm -rf /lib/systemd/system/v2ray.service + else + update-rc.d -f v2ray remove >/dev/null 2>&1 + rm -rf /etc/init.d/v2ray + fi + # clear + echo + echo -e "$green V2Ray 卸载完成啦 ....$none" + echo + echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我" + echo + echo "反馈问题: https://github.com/233boy/v2ray/issus" + echo + + fi + elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then + backup="/etc/v2ray/233blog_v2ray_backup.txt" while :; do echo read -p "$(echo -e "是否卸载 ${yellow}V2Ray$none [${magenta}Y/N$none]:")" uninstall_v2ray_ask @@ -1823,7 +2003,7 @@ uninstall() { echo -e " $red 大胸弟...你貌似毛有安装 V2Ray ....卸载个鸡鸡哦...$none - 备注...仅支持卸载使用我(233blog.com)提供的 V2Ray 一键安装脚本 + 备注...仅支持卸载使用我 (233blog.com) 提供的 V2Ray 一键安装脚本 " && exit 1 fi @@ -1866,7 +2046,7 @@ while :; do echo " 2. 卸载" echo if [[ $local_install ]]; then - echo " 温馨提示.. 本地安装已启用 .." + echo -e "$yellow 温馨提示.. 本地安装已启用 ..$none" echo fi read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" choose diff --git a/v2ray.old.sh b/v2ray.old.sh new file mode 100644 index 0000000..6382eff --- /dev/null +++ b/v2ray.old.sh @@ -0,0 +1,3699 @@ +#!/bin/bash + +red='\e[91m' +green='\e[92m' +yellow='\e[93m' +magenta='\e[95m' +cyan='\e[96m' +none='\e[0m' + +# Root +[[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1 + +_version="v1.70" + +cmd="apt-get" + +sys_bit=$(uname -m) + +if [[ $sys_bit == "i386" || $sys_bit == "i686" ]]; then + v2ray_bit="32" +elif [[ $sys_bit == "x86_64" ]]; then + v2ray_bit="64" +else + echo -e " 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}" && exit 1 +fi + +# 笨笨的检测方法 +if [[ -f /usr/bin/apt-get ]] || [[ -f /usr/bin/yum && -f /bin/systemctl ]]; then + + if [[ -f /usr/bin/yum ]]; then + + cmd="yum" + + fi + if [[ -f /bin/systemctl ]]; then + systemd=true + fi + +else + + echo -e " 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}" && exit 1 + +fi + +backup="/etc/v2ray/233blog_v2ray_backup.txt" + +if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then + + v2ray_transport=$(sed -n '17p' $backup) + v2ray_port=$(sed -n '19p' $backup) + v2ray_id=$(sed -n '21p' $backup) + v2ray_dynamicPort_start=$(sed -n '23p' $backup) + v2ray_dynamicPort_end=$(sed -n '25p' $backup) + domain=$(sed -n '27p' $backup) + caddy_status=$(sed -n '29p' $backup) + shadowsocks_status=$(sed -n '31p' $backup) + ssport=$(sed -n '33p' $backup) + sspass=$(sed -n '35p' $backup) + ssciphers=$(sed -n '37p' $backup) + blocked_ad_status=$(sed -n '39p' $backup) + ws_path_status=$(sed -n '41p' $backup) + ws_path=$(sed -n '43p' $backup) + + v2ray_ver=$(/usr/bin/v2ray/v2ray -version | head -n 1 | cut -d " " -f2) + +else + echo -e " 哎呀哎呀…… ${red}出错咯...请重新安装V2Ray${none} ${yellow}~(^_^) ${none}" && exit 1 +fi + +if [[ $caddy_status == "true" ]]; then + caddy_installed=true +fi +if [[ $shadowsocks_status == "true" ]]; then + shadowsocks=true +fi +if [[ $blocked_ad_status == "true" ]]; then + is_blocked_ad=true +fi +if [[ $v2ray_transport -ge 9 ]]; then + dynamicPort=true + port_range="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}" +fi +if [[ $ws_path_status == "true" ]]; then + is_ws_path=true +fi + +uuid=$(cat /proc/sys/kernel/random/uuid) +old_id="23332333-2333-2333-2333-233boy233boy" +v2ray_server_config="/etc/v2ray/config.json" +v2ray_client_config="/etc/v2ray/233blog_v2ray_config.json" +v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}') +caddy_pid=$(pgrep "caddy") + +if [ $v2ray_pid ]; then + v2ray_status="$green正在运行$none" +else + v2ray_status="$red未在运行$none" +fi +if [[ $v2ray_transport == "4" && $caddy_installed ]] && [[ $caddy_pid ]]; then + caddy_run_status="$green正在运行$none" +else + caddy_run_status="$red未在运行$none" +fi + +transport=( + TCP + TCP_HTTP + WebSocket + "WebSocket + TLS" + mKCP + mKCP_utp + mKCP_srtp + mKCP_wechat-video + TCP_dynamicPort + TCP_HTTP_dynamicPort + WebSocket_dynamicPort + mKCP_dynamicPort + mKCP_utp_dynamicPort + mKCP_srtp_dynamicPort + mKCP_wechat-video_dynamicPort +) + +ciphers=( + aes-128-cfb + aes-256-cfb + chacha20 + chacha20-ietf + aes-128-gcm + aes-256-gcm + chacha20-ietf-poly1305 +) + +get_transport_args() { + header="none" + if [[ $is_ws_path ]]; then + host="/$ws_path" + else + host="" + fi + case $v2ray_transport in + 1 | 9) + net="tcp" + network="tcp" + obfs="none" + ;; + 2 | 10) + net="tcp" + network="tcp" + header="http" + host="www.baidu.com" + obfs="http" + ;; + 3 | 4 | 11) + net="ws" + network="ws (WebSocket)" + obfs="websocket" + ;; + 5 | 12) + net="kcp" + network="kcp" + ;; + 6 | 13) + net="kcp" + network="kcp" + header="utp" + ;; + 7 | 14) + net="kcp" + network="kcp" + header="srtp" + ;; + 8 | 15) + net="kcp" + network="kcp" + header="wechat-video" + ;; + esac +} +create_vmess_URL_config() { + + [[ -z $net ]] && get_transport_args + + if [[ $v2ray_transport == "4" ]]; then + cat >/etc/v2ray/vmess_qr.json <<-EOF + { + "ps": "233blog_v2ray_${domain}", + "add": "${domain}", + "port": "443", + "id": "${v2ray_id}", + "aid": "233", + "net": "ws", + "type": "none", + "host": "${host}", + "tls": "tls" + } + EOF + else + [[ -z $ip ]] && get_ip + cat >/etc/v2ray/vmess_qr.json <<-EOF + { + "ps": "233blog_v2ray_${ip}", + "add": "${ip}", + "port": "${v2ray_port}", + "id": "${v2ray_id}", + "aid": "233", + "net": "${net}", + "type": "${header}", + "host": "${host}", + "tls": "" + } + EOF + fi +} +view_v2ray_config_info() { + + get_transport_args + + echo + echo + echo "---------- V2Ray 配置信息 -------------" + if [[ $v2ray_transport == "4" ]]; then + if [[ ! $caddy_installed ]]; then + echo + echo -e " $red警告！$none$yellow请自行配置 TLS...教程: https://233blog.com/post/19/$none" + fi + echo + echo -e "$yellow 地址 (Address) = $cyan${domain}$none" + echo + echo -e "$yellow 端口 (Port) = ${cyan}443${none}" + echo + echo -e "$yellow 用户ID (User ID / UUID) = $cyan${v2ray_id}$none" + echo + echo -e "$yellow 额外ID (Alter Id) = ${cyan}233${none}" + echo + echo -e "$yellow 传输协议 (Network) = ${cyan}${network}$none" + echo + echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none" + echo + if [[ $is_ws_path ]]; then + echo -e "$yellow WebSocket 路径 (WS path) = ${cyan}/${ws_path}$none" + echo + fi + echo -e "$yellow TLS (Enable TLS) = ${cyan}打开$none" + echo + echo -e " 请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) " + echo + if [[ $is_blocked_ad ]]; then + echo " 备注: 广告拦截已开启.." + echo + fi + else + [[ -z $ip ]] && get_ip + echo + echo -e "$yellow 地址 (Address) = $cyan${ip}$none" + echo + echo -e "$yellow 端口 (Port) = $cyan$v2ray_port$none" + echo + echo -e "$yellow 用户ID (User ID / UUID) = $cyan${v2ray_id}$none" + echo + echo -e "$yellow 额外ID (Alter Id) = ${cyan}233${none}" + echo + echo -e "$yellow 传输协议 (Network) = ${cyan}${network}$none" + echo + echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none" + echo + if [[ $obfs ]]; then + echo -e " 请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) " + echo + else + echo -e " 帅帅的提示...此 V2Ray 配置不支持 Pepi / ShadowRay" + echo + fi + fi + if [[ $v2ray_transport -ge 9 && $is_blocked_ad ]]; then + echo " 备注: 动态端口已启用...广告拦截已开启..." + echo + elif [[ $v2ray_transport -ge 9 ]]; then + echo " 备注: 动态端口已启用..." + echo + elif [[ $is_blocked_ad ]]; then + echo " 备注: 广告拦截已开启.." + echo + fi + echo "---------- END -------------" + echo + echo "V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo +} +get_shadowsocks_config() { + if [[ $shadowsocks ]]; then + + while :; do + echo + echo -e "$yellow 1. $none查看 Shadowsocks 配置信息" + echo + echo -e "$yellow 2. $none生成二维码链接" + echo + read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + view_shadowsocks_config_info + break + ;; + 2) + get_shadowsocks_config_qr_link + break + ;; + *) + error + ;; + esac + fi + + done + else + shadowsocks_config + fi +} +view_shadowsocks_config_info() { + if [[ $shadowsocks ]]; then + get_ip + local ss="ss://$(echo -n "${ssciphers}:${sspass}@${ip}:${ssport}" | base64)#233blog_ss_${ip}" + echo + echo + echo "---------- Shadowsocks 配置信息 -------------" + echo + echo -e "$yellow 服务器地址 = $cyan${ip}$none" + echo + echo -e "$yellow 服务器端口 = $cyan$ssport$none" + echo + echo -e "$yellow 密码 = $cyan$sspass$none" + echo + echo -e "$yellow 加密协议 = $cyan${ssciphers}$none" + echo + echo -e "$yellow SS 链接 = ${cyan}$ss$none" + echo + echo -e " 备注:$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该 SS 链接" + echo + else + shadowsocks_config + fi +} +get_shadowsocks_config_qr_link() { + if [[ $shadowsocks ]]; then + echo + echo -e "$green 正在生成链接.... 稍等片刻即可....$none" + echo + get_ip + local ss="ss://$(echo -n "${ssciphers}:${sspass}@${ip}:${ssport}" | base64)#233blog_ss_${ip}" + echo "${ss}" >/tmp/233blog_shadowsocks.txt + cat /tmp/233blog_shadowsocks.txt | qrencode -s 50 -o /tmp/233blog_shadowsocks.png + + local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local link=$(curl -s --upload-file /tmp/233blog_shadowsocks.png "https://transfer.sh/${random}_233blog_shadowsocks.png") + if [[ $link ]]; then + echo + echo "---------- Shadowsocks 二维码链接 -------------" + echo + echo -e "$yellow 链接 = $cyan$link$none" + echo + echo -e " 温馨提示...$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该二维码" + echo + echo "备注...链接将在 14 天后失效" + echo + echo "提醒...请不要把链接分享出去...除非你有特别的理由...." + echo + else + echo + echo -e "$red 哎呀呀呀...出错咯...请重试$none" + echo + fi + rm -rf /tmp/233blog_shadowsocks.png + rm -rf /tmp/233blog_shadowsocks.txt + else + shadowsocks_config + fi + +} + +get_shadowsocks_config_qr_ask() { + echo + while :; do + echo -e "是否需要生成$yellow Shadowsocks 配置信息 $none二维码链接 [${magenta}Y/N$none]" + read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n + [ -z $y_n ] && y_n="n" + if [[ $y_n == [Yy] ]]; then + get_shadowsocks_config_qr_link + break + elif [[ $y_n == [Nn] ]]; then + break + else + error + fi + done + +} +change_shadowsocks_config() { + if [[ $shadowsocks ]]; then + + while :; do + echo + echo -e "$yellow 1. $none修改 Shadowsocks 端口" + echo + echo -e "$yellow 2. $none修改 Shadowsocks 密码" + echo + echo -e "$yellow 3. $none修改 Shadowsocks 加密协议" + echo + echo -e "$yellow 4. $none关闭 Shadowsocks" + echo + read -p "$(echo -e "请选择 [${magenta}1-4$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + change_shadowsocks_port + break + ;; + 2) + change_shadowsocks_password + break + ;; + 3) + change_shadowsocks_ciphers + break + ;; + 4) + disable_shadowsocks + break + ;; + *) + error + ;; + esac + fi + + done + else + + shadowsocks_config + fi +} +shadowsocks_config() { + echo + echo + echo -e " $red大佬...你没有配置 Shadowsocks $none...不过现在想要配置的话也是可以的 ^_^" + echo + echo + + while :; do + echo -e "是否配置 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]" + read -p "$(echo -e "(默认 [${cyan}N$none]):") " install_shadowsocks + [[ -z "$install_shadowsocks" ]] && install_shadowsocks="n" + if [[ "$install_shadowsocks" == [Yy] ]]; then + echo + new_shadowsocks=true + shadowsocks_port_config + shadowsocks_password_config + shadowsocks_ciphers_config + pause + config + clear + shadowsocks=true + ssport=$new_ssport + sspass=$new_sspass + ssciphers=$new_ssciphers + view_shadowsocks_config_info + get_shadowsocks_config_qr_ask + break + elif [[ "$install_shadowsocks" == [Nn] ]]; then + echo + echo -e " $green已取消配置 Shadowsocks ....$none" + echo + break + else + error + fi + + done +} +shadowsocks_port_config() { + local random=$(shuf -i20001-65535 -n1) + while :; do + echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]，不能和 "$yellow"V2ray"$none" 端口相同" + read -p "$(echo -e "(默认端口: ${cyan}${random}$none):") " new_ssport + [ -z "$new_ssport" ] && new_ssport=$random + case $new_ssport in + $v2ray_port) + echo + echo -e " 不能和$cyan V2Ray 端口 $none一毛一样...." + error + ;; + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + if [[ $v2ray_transport == "4" && $new_ssport == "80" ]] || [[ $v2ray_transport == "4" && $new_ssport == "443" ]]; then + echo + echo -e "由于你选择了 "$green"WebSocket + TLS"$none" 传输协议." + echo + echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口" + error + elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start == $new_ssport || $v2ray_dynamicPort_end == $new_ssport ]]; then + local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}" + echo + echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none" + error + elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start -lt $new_ssport && $new_ssport -le $v2ray_dynamicPort_end ]]; then + local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}" + echo + echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none" + error + else + echo + echo + echo -e "$yellow Shadowsocks 端口 = $cyan$new_ssport$none" + echo "----------------------------------------------------------------" + echo + break + fi + ;; + *) + error + ;; + esac + + done + +} + +shadowsocks_password_config() { + + while :; do + echo -e "请输入 "$yellow"Shadowsocks"$none" 密码" + read -p "$(echo -e "(默认密码: ${cyan}233blog.com$none)"): " new_sspass + [ -z "$new_sspass" ] && new_sspass="233blog.com" + case $new_sspass in + *[/$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... " + echo + error + ;; + *) + echo + echo + echo -e "$yellow Shadowsocks 密码 = $cyan$new_sspass$none" + echo "----------------------------------------------------------------" + echo + break + ;; + esac + + done + +} + +shadowsocks_ciphers_config() { + + while :; do + echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-7$none]" + for ((i = 1; i <= ${#ciphers[*]}; i++)); do + ciphers_show="${ciphers[$i - 1]}" + echo + echo -e "$yellow $i. $none${ciphers_show}" + done + echo + read -p "$(echo -e "(默认加密协议: ${cyan}${ciphers[6]}$none)"):" ssciphers_opt + [ -z "$ssciphers_opt" ] && ssciphers_opt=7 + case $ssciphers_opt in + [1-7]) + new_ssciphers=${ciphers[$ssciphers_opt - 1]} + echo + echo + echo -e "$yellow Shadowsocks 加密协议 = $cyan${new_ssciphers}$none" + echo "----------------------------------------------------------------" + echo + break + ;; + *) + error + ;; + esac + + done +} + +change_shadowsocks_port() { + echo + while :; do + echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]" + read -p "$(echo -e "(当前端口: ${cyan}$ssport$none):") " new_ssport + [ -z "$new_ssport" ] && error && continue + case $new_ssport in + $ssport) + echo + echo " 跟当前端口一毛一样....修改个鸡鸡哦" + error + ;; + $v2ray_port) + echo + echo -e " 不能和$cyan V2Ray 端口 $none一毛一样...." + error + ;; + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + if [[ $v2ray_transport == "4" && $new_ssport == "80" ]] || [[ $v2ray_transport == "4" && $new_ssport == "443" ]]; then + echo + echo -e "由于你选择了 "$green"WebSocket + TLS"$none" 传输协议." + echo + echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口" + error + elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start == $new_ssport || $v2ray_dynamicPort_end == $new_ssport ]]; then + local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}" + echo + echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none" + error + elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start -lt $new_ssport && $new_ssport -le $v2ray_dynamicPort_end ]]; then + local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}" + echo + echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none" + error + else + echo + echo + echo -e "$yellow Shadowsocks 端口 = $cyan$new_ssport$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "33s/$ssport/$new_ssport/" $backup + del_port $ssport + open_port $new_ssport + ssport=$new_ssport + config + clear + view_shadowsocks_config_info + get_shadowsocks_config_qr_ask + break + fi + ;; + *) + error + ;; + esac + + done +} +change_shadowsocks_password() { + echo + while :; do + echo -e "请输入 "$yellow"Shadowsocks"$none" 密码" + read -p "$(echo -e "(当前密码：${cyan}$sspass$none)"): " new_sspass + [ -z "$new_sspass" ] && error && continue + case $new_sspass in + $sspass) + echo + echo " 跟当前密码一毛一样....修改个鸡鸡哦" + error + ;; + *[/$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... " + echo + error + ;; + *) + echo + echo + echo -e "$yellow Shadowsocks 密码 = $cyan$new_sspass$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "35s/$sspass/$new_sspass/" $backup + sspass=$new_sspass + config + clear + view_shadowsocks_config_info + get_shadowsocks_config_qr_ask + break + ;; + esac + + done + +} + +change_shadowsocks_ciphers() { + echo + while :; do + echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-${#ciphers[*]}$none]" + for ((i = 1; i <= ${#ciphers[*]}; i++)); do + ciphers_show="${ciphers[$i - 1]}" + echo + echo -e "$yellow $i. $none${ciphers_show}" + done + echo + read -p "$(echo -e "(当前加密协议: ${cyan}${ssciphers}$none)"):" ssciphers_opt + [ -z "$ssciphers_opt" ] && error && continue + case $ssciphers_opt in + [1-7]) + new_ssciphers=${ciphers[$ssciphers_opt - 1]} + if [[ $new_ssciphers == $ssciphers ]]; then + echo + echo " 跟当前加密协议一毛一样....修改个鸡鸡哦" + error && continue + fi + echo + echo + echo -e "$yellow Shadowsocks 加密协议 = $cyan${new_ssciphers}$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "37s/$ssciphers/$new_ssciphers/" $backup + ssciphers=$new_ssciphers + config + clear + view_shadowsocks_config_info + get_shadowsocks_config_qr_ask + break + ;; + *) + error + ;; + esac + + done + +} +disable_shadowsocks() { + echo + + while :; do + echo -e "是否关闭 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]" + read -p "$(echo -e "(默认 [${cyan}N$none]):") " y_n + [[ -z "$y_n" ]] && y_n="n" + if [[ "$y_n" == [Yy] ]]; then + echo + echo + echo -e "$yellow 关闭 Shadowsocks = $cyan是$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "31s/true/false/" $backup + del_port $ssport + shadowsocks='' + config + # clear + echo + echo + echo + echo -e "$green Shadowsocks 已关闭...不过你也可以随时重新启用 Shadowsocks ...只要你喜欢$none" + echo + break + elif [[ "$y_n" == [Nn] ]]; then + echo + echo -e " $green已取消关闭 Shadowsocks ....$none" + echo + break + else + error + fi + + done +} +change_v2ray_config() { + while :; do + echo + echo -e "$yellow 1. $none修改 V2Ray 端口" + echo + echo -e "$yellow 2. $none修改 V2Ray 传输协议" + echo + echo -e "$yellow 3. $none修改 V2Ray 动态端口 (如果可以)" + echo + echo -e "$yellow 4. $none修改 用户ID ( UUID )" + echo + echo -e "$yellow 5. $none修改 TLS 域名 (如果可以)" + echo + echo -e "$yellow 6. $none修改 分流的路径 (如果可以)" + echo + echo -e "$yellow 7. $none修改 伪装的网址 (如果可以)" + echo + echo -e "$yellow 8. $none关闭 网站伪装 和 路径分流 (如果可以)" + echo + echo -e "$yellow 9. $none开启 / 关闭 广告拦截" + echo + read -p "$(echo -e "请选择 [${magenta}1-9$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + change_v2ray_port + break + ;; + 2) + change_v2ray_transport + break + ;; + 3) + change_v2ray_dynamicport + break + ;; + 4) + change_v2ray_id + break + ;; + 5) + change_domain + break + ;; + 6) + change_ws_path_config + break + ;; + 7) + change_proxy_site_config + break + ;; + 8) + disable_ws_path + break + ;; + 9) + blocked_hosts + break + ;; + *) + error + ;; + esac + fi + done +} +change_v2ray_port() { + if [[ $v2ray_transport == 4 ]]; then + echo + echo -e " 由于你目前使用的是$yellow WebSocket + TLS $none传输协议...所以修不修改 V2Ray 端口没有什么不一样的" + echo + echo " 如果你想要使用其他端口...可以先修改 V2Ray 的传输协议..之后再修改 V2Ray 端口" + echo + change_v2ray_transport_ask + else + echo + while :; do + echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]" + read -p "$(echo -e "(当前端口: ${cyan}${v2ray_port}$none):")" v2ray_port_opt + [[ -z $v2ray_port_opt ]] && error && continue + case $v2ray_port_opt in + $v2ray_port) + echo + echo " 哎呀...跟当前端口一毛一样呀...修改个鸡鸡哦" + error + ;; + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + if [[ $shadowsocks ]] && [[ $v2ray_port_opt == $ssport ]]; then + echo + echo -e " ...不能跟$cyan Shadowsocks 端口 $none一毛一样..." + error + elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start == $v2ray_port_opt || $v2ray_dynamicPort_end == $v2ray_port_opt ]]; then + local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}" + echo + echo -e " 抱歉..此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none" + error + + elif [[ $dynamicPort ]] && [[ $v2ray_dynamicPort_start -lt $v2ray_port_opt && $v2ray_port_opt -le $v2ray_dynamicPort_end ]]; then + local multi_port="${v2ray_dynamicPort_start} - ${v2ray_dynamicPort_end}" + echo + echo -e " 抱歉...此端口和$yellow V2Ray 动态端口 $none冲突...当前 V2Ray 动态端口范围为: $cyan$multi_port$none" + error + else + echo + echo + echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port_opt$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "19s/$v2ray_port/$v2ray_port_opt/" $backup + del_port $v2ray_port + open_port $v2ray_port_opt + v2ray_port=$v2ray_port_opt + config + clear + view_v2ray_config_info + download_v2ray_config_ask + break + fi + ;; + *) + error + ;; + esac + + done + fi + +} +download_v2ray_config_ask() { + echo + while :; do + echo -e "是否需要 下载 V2Ray 配置 / 生成配置信息链接 / 生成二维码链接 [${magenta}Y/N$none]" + read -p "$(echo -e "默认 [${cyan}N$none]:")" y_n + [ -z $y_n ] && y_n="n" + if [[ $y_n == [Yy] ]]; then + download_v2ray_config + break + elif [[ $y_n == [Nn] ]]; then + break + else + error + fi + done + +} +change_v2ray_transport_ask() { + echo + while :; do + echo -e "是否需要修改$yellow V2Ray $none传输协议 [${magenta}Y/N$none]" + read -p "$(echo -e "默认 [${cyan}N$none]:")" y_n + [ -z $y_n ] && break + if [[ $y_n == [Yy] ]]; then + change_v2ray_transport + break + elif [[ $y_n == [Nn] ]]; then + break + else + error + fi + done +} +change_v2ray_transport() { + echo + while :; do + echo -e "请选择 "$yellow"V2Ray"$none" 传输协议 [${magenta}1-${#transport[*]}$none]" + echo + for ((i = 1; i <= ${#transport[*]}; i++)); do + Stream="${transport[$i - 1]}" + if [[ "$i" -le 9 ]]; then + # echo + echo -e "$yellow $i. $none${Stream}" + else + # echo + echo -e "$yellow $i. $none${Stream}" + fi + done + echo + echo "备注1: 含有 [dynamicPort] 的即启用动态端口.." + echo "备注2: [utp | srtp | wechat-video] 分别为 伪装成 [BT下载 | 视频通话 | 微信视频通话]" + echo + read -p "$(echo -e "(当前传输协议: ${cyan}${transport[$v2ray_transport - 1]}$none)"):" v2ray_transport_opt + if [ -z "$v2ray_transport_opt" ]; then + error + else + case $v2ray_transport_opt in + $v2ray_transport) + echo + echo " 哎呀...跟当前传输协议一毛一样呀...修改个鸡鸡哦" + error + ;; + 4) + if [[ $v2ray_port == "80" || $v2ray_port == "443" ]]; then + echo + echo -e " 抱歉...如果你想要使用${cyan} WebSocket + TLS $none传输协议.. ${red}V2Ray 端口不能为 80 或者 443 ...$none" + echo + echo -e " 当前 V2Ray 端口: ${cyan}$v2ray_port$none" + error + elif [[ $shadowsocks ]] && [[ $ssport == "80" || $ssport == "443" ]]; then + echo + echo -e " 抱歉...如果你想要使用${cyan} WebSocket + TLS $none传输协议.. ${red}Shadowsocks 端口不能为 80 或者 443 ...$none" + echo + echo -e " 当前 Shadowsocks 端口: ${cyan}$ssport$none" + error + else + echo + echo + echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none" + echo "----------------------------------------------------------------" + echo + break + fi + ;; + [1-9] | 1[0-5]) + echo + echo + echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none" + echo "----------------------------------------------------------------" + echo + break + ;; + *) + error + ;; + esac + fi + + done + pause + + if [[ $v2ray_transport_opt == 4 ]]; then + ws_config + elif [[ $v2ray_transport_opt -ge 9 ]]; then + v2ray_dynamic_port_start + v2ray_dynamic_port_end + pause + if [[ $v2ray_transport == 4 ]]; then + del_port "80" + del_port "443" + if [[ $caddy_installed && $caddy_pid ]]; then + # systemctl stop caddy + do_service stop caddy + if [[ $systemd ]]; then + systemctl disable caddy >/dev/null 2>&1 + else + update-rc.d -f caddy remove >/dev/null 2>&1 + fi + elif [[ $caddy_installed ]]; then + if [[ $systemd ]]; then + systemctl disable caddy >/dev/null 2>&1 + else + update-rc.d -f caddy remove >/dev/null 2>&1 + fi + fi + if [[ $is_ws_path ]]; then + sed -i "41s/true/false/" $backup + fi + elif [[ $v2ray_transport -ge 9 ]]; then + del_port "multiport" + fi + open_port "multiport" + sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup + port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}" + config + clear + v2ray_transport=$v2ray_transport_opt + view_v2ray_config_info + download_v2ray_config_ask + else + sed -i "17s/$v2ray_transport/$v2ray_transport_opt/" $backup + if [[ $v2ray_transport == 4 ]]; then + del_port "80" + del_port "443" + if [[ $caddy_installed && $caddy_pid ]]; then + # systemctl stop caddy + do_service stop caddy + if [[ $systemd ]]; then + systemctl disable caddy >/dev/null 2>&1 + else + update-rc.d -f caddy remove >/dev/null 2>&1 + fi + elif [[ $caddy_installed ]]; then + if [[ $systemd ]]; then + systemctl disable caddy >/dev/null 2>&1 + else + update-rc.d -f caddy remove >/dev/null 2>&1 + fi + fi + if [[ $is_ws_path ]]; then + sed -i "41s/true/false/" $backup + fi + elif [[ $v2ray_transport -ge 9 ]]; then + del_port "multiport" + fi + config + clear + v2ray_transport=$v2ray_transport_opt + view_v2ray_config_info + download_v2ray_config_ask + fi + +} + +ws_config() { + while :; do + echo + echo + echo + echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！" + read -p "(例如：233blog.com): " new_domain + [ -z "$new_domain" ] && error && continue + echo + echo + echo -e "$yellow 你的域名 = $cyan$new_domain$none" + echo "----------------------------------------------------------------" + break + done + get_ip + echo + echo + echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none" + echo + echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none" + echo + echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none" + echo "----------------------------------------------------------------" + echo + + while :; do + + read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record + if [[ -z "$record" ]]; then + error + else + if [[ "$record" == [Yy] ]]; then + echo + echo + echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none" + echo "----------------------------------------------------------------" + echo + break + else + error + fi + fi + + done + + if [[ $caddy_installed ]]; then + ws_path_config_ask + pause + domain_check + sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup + if [[ $new_ws_path ]]; then + sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + echo "$proxy_site" >>$backup + ws_path=$new_ws_path + is_ws_path=true + fi + + if [[ $v2ray_transport -ge 9 ]]; then + del_port "multiport" + fi + domain=$new_domain + + open_port "80" + open_port "443" + if [[ $systemd ]]; then + systemctl enable caddy >/dev/null 2>&1 + else + update-rc.d -f caddy defaults >/dev/null 2>&1 + fi + caddy_config + config + v2ray_transport=$v2ray_transport_opt + clear + view_v2ray_config_info + download_v2ray_config_ask + else + echo -e " + + 安装 Caddy 来实现 自动配置 TLS + + 如果你已经安装 Nginx 或 Caddy + + $yellow并且..自己能搞定配置 TLS$none + + 那么就不需要 打开自动配置 TLS + " + echo "----------------------------------------------------------------" + echo + + while :; do + + read -p "$(echo -e "(是否自动配置 TLS: [${magenta}Y/N$none]):") " auto_install_caddy + if [[ -z "$auto_install_caddy" ]]; then + error + else + if [[ "$auto_install_caddy" == [Yy] ]]; then + echo + echo + echo -e "$yellow 自动配置 TLS = $cyan打开$none" + echo "----------------------------------------------------------------" + echo + ws_path_config_ask + pause + domain_check + sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/; 29s/false/true/" $backup + if [[ $new_ws_path ]]; then + sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + echo "$proxy_site" >>$backup + ws_path=$new_ws_path + is_ws_path=true + fi + if [[ $v2ray_transport -ge 9 ]]; then + del_port "multiport" + fi + domain=$new_domain + install_caddy + open_port "80" + open_port "443" + caddy_config + config + v2ray_transport=$v2ray_transport_opt + caddy_installed=true + clear + view_v2ray_config_info + download_v2ray_config_ask + break + elif [[ "$auto_install_caddy" == [Nn] ]]; then + echo + echo + echo -e "$yellow 自动配置 TLS = $cyan关闭$none" + echo "----------------------------------------------------------------" + echo + pause + domain_check + sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup + if [[ $v2ray_transport -ge 9 ]]; then + del_port "multiport" + fi + domain=$new_domain + open_port "80" + open_port "443" + config + v2ray_transport=$v2ray_transport_opt + clear + view_v2ray_config_info + download_v2ray_config_ask + break + else + error + fi + fi + + done + fi + +} + +ws_path_config_ask() { + echo + while :; do + echo -e "是否开启 网站伪装 和 路径分流 [${magenta}Y/N$none]" + read -p "$(echo -e "(默认: [${cyan}N$none]):")" ws_path_ask + [[ -z $ws_path_ask ]] && ws_path_ask="n" + + case $ws_path_ask in + Y | y) + ws_path_config + break + ;; + N | n) + echo + echo + echo -e "$yellow 网站伪装 和 路径分流 = $cyan不想配置$none" + echo "----------------------------------------------------------------" + echo + break + ;; + *) + error + ;; + esac + done +} +ws_path_config() { + echo + while :; do + echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可" + read -p "$(echo -e "(默认: [${cyan}233blog$none]):")" new_ws_path + [[ -z $new_ws_path ]] && new_ws_path="233blog" + + case $new_ws_path in + *[/$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... " + echo + error + ;; + *) + echo + echo + echo -e "$yellow 分流的路径 = ${cyan}/${new_ws_path}$none" + echo "----------------------------------------------------------------" + echo + break + ;; + esac + done + proxy_site_config +} +proxy_site_config() { + echo + while :; do + echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com" + echo -e "举例...假设你当前的域名是$green $domain $none, 伪装的网址的是 https://liyafly.com" + echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" + echo -e "其实就是一个反代...明白就好..." + echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" + read -p "$(echo -e "(默认: [${cyan}https://liyafly.com$none]):")" proxy_site + [[ -z $proxy_site ]] && proxy_site="https://liyafly.com" + + case $proxy_site in + *) + echo + echo + echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none" + echo "----------------------------------------------------------------" + echo + break + ;; + esac + done +} + +install_caddy() { + if [[ $cmd == "yum" ]]; then + [[ $(pgrep "httpd") ]] && systemctl stop httpd + [[ $(command -v httpd) ]] && yum remove httpd -y + else + [[ $(pgrep "apache2") ]] && service apache2 stop + [[ $(command -v apache2) ]] && apt-get remove apache2* -y + fi + local caddy_tmp="/tmp/install_caddy/" + local caddy_tmp_file="/tmp/install_caddy/caddy.tar.gz" + if [[ $sys_bit == "i386" || $sys_bit == "i686" ]]; then + local caddy_download_link="https://caddyserver.com/download/linux/386?license=personal" + elif [[ $sys_bit == "x86_64" ]]; then + local caddy_download_link="https://caddyserver.com/download/linux/amd64?license=personal" + else + echo -e "$red 自动安装 Caddy 失败！不支持你的系统。$none" && exit 1 + fi + + mkdir -p $caddy_tmp + + if ! wget --no-check-certificate -O "$caddy_tmp_file" $caddy_download_link; then + echo -e "$red 下载 Caddy 失败！$none" && exit 1 + fi + + tar zxf $caddy_tmp_file -C $caddy_tmp + cp -f ${caddy_tmp}caddy /usr/local/bin/ + + if [[ ! -f /usr/local/bin/caddy ]]; then + echo -e "$red 安装 Caddy 出错！" && exit 1 + fi + + setcap CAP_NET_BIND_SERVICE=+eip /usr/local/bin/caddy + + if [[ $systemd ]]; then + cp -f ${caddy_tmp}init/linux-systemd/caddy.service /lib/systemd/system/ + # sed -i "s/www-data/root/g" /lib/systemd/system/caddy.service + systemctl enable caddy + else + cp -f ${caddy_tmp}init/linux-sysvinit/caddy /etc/init.d/caddy + # sed -i "s/www-data/root/g" /etc/init.d/caddy + chmod +x /etc/init.d/caddy + update-rc.d -f caddy defaults + fi + + mkdir -p /etc/ssl/caddy + + if [ -z "$(grep www-data /etc/passwd)" ]; then + useradd -M -s /usr/sbin/nologin www-data + fi + chown -R www-data.www-data /etc/ssl/caddy + + mkdir -p /etc/caddy/ + rm -rf $caddy_tmp + +} +caddy_config() { + local email=$(shuf -i1-10000000000 -n1) + if [[ $is_ws_path ]]; then + [[ -z $proxy_site ]] && proxy_site=$(sed '$!d' $backup) + cat >/etc/caddy/Caddyfile <<-EOF +$domain { + tls ${email}@gmail.com + gzip + timeouts none + proxy / $proxy_site { + without /${ws_path} + } + proxy /${ws_path} 127.0.0.1:${v2ray_port} { + without /${ws_path} + websocket + } +} + EOF + else + cat >/etc/caddy/Caddyfile <<-EOF +$domain { + tls ${email}@gmail.com + timeouts none + proxy / 127.0.0.1:${v2ray_port} { + websocket + } +} + EOF + fi + # systemctl restart caddy + do_service restart caddy +} +v2ray_dynamic_port_start() { + echo + echo + while :; do + echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]" + read -p "$(echo -e "(默认开始端口: ${cyan}10000$none):")" v2ray_dynamic_port_start_input + [ -z $v2ray_dynamic_port_start_input ] && v2ray_dynamic_port_start_input=10000 + case $v2ray_dynamic_port_start_input in + $v2ray_port) + echo + echo " 不能和 V2Ray 端口一毛一样...." + error + ;; + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input == $ssport ]]; then + echo + echo " 不能和 Shadowsocks 端口一毛一样...." + error + else + echo + echo + echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none" + echo "----------------------------------------------------------------" + echo + break + fi + + ;; + *) + error + ;; + esac + + done + + if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then + lt_v2ray_port=true + fi + if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input -lt $ssport ]]; then + lt_ssport=true + fi + +} + +v2ray_dynamic_port_end() { + echo + while :; do + echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]" + read -p "$(echo -e "(默认结束端口: ${cyan}20000$none):")" v2ray_dynamic_port_end_input + [ -z $v2ray_dynamic_port_end_input ] && v2ray_dynamic_port_end_input=20000 + case $v2ray_dynamic_port_end_input in + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + + if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then + echo + echo " 不能小于或等于 V2Ray 动态端口开始范围" + error + elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then + echo + echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..." + echo + echo -e " 当前 V2Ray 端口: ${cyan}$v2ray_port$none" + error + elif [ $lt_ssport ] && [[ ${v2ray_dynamic_port_end_input} -ge $ssport ]]; then + echo + echo " V2Ray 动态端口结束范围 不能包括 Shadowsocks 端口..." + echo + echo -e " 当前 Shadowsocks 端口: ${cyan}$ssport$none" + error + else + echo + echo + echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none" + echo "----------------------------------------------------------------" + echo + break + fi + ;; + *) + error + ;; + esac + + done + +} +change_v2ray_dynamicport() { + if [[ $v2ray_transport -ge 9 ]]; then + change_v2ray_dynamic_port_start + change_v2ray_dynamic_port_end + pause + del_port "multiport" + open_port "multiport" + sed -i "23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup + port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}" + config + # clear + echo + echo -e "$green 动态端口修改成功啦...你不需要修改 V2Ray 客户端配置...保持原有的配置即可...$none" + echo + else + echo + echo -e "$red ...当前传输协议木有启用动态端口...$none" + echo + while :; do + echo -e "是否需要修改传输协议 [${magenta}Y/N$none]" + read -p "$(echo -e "默认 [${cyan}N$none]:")" y_n + if [[ -z $y_n ]]; then + echo + echo -e "$green 已取消修改传输协议...$none" + echo + break + else + if [[ $y_n == [Yy] ]]; then + change_v2ray_transport + break + elif [[ $y_n == [Nn] ]]; then + echo + echo -e "$green 已取消修改传输协议...$none" + echo + break + else + error + fi + fi + done + + fi +} +change_v2ray_dynamic_port_start() { + echo + echo + while :; do + echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]" + read -p "$(echo -e "(当前动态开始端口: ${cyan}$v2ray_dynamicPort_start$none):")" v2ray_dynamic_port_start_input + [ -z $v2ray_dynamic_port_start_input ] && error && continue + case $v2ray_dynamic_port_start_input in + $v2ray_port) + echo + echo " 不能和 V2Ray 端口一毛一样...." + error + ;; + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input == $ssport ]]; then + echo + echo " 不能和 Shadowsocks 端口一毛一样...." + error + else + echo + echo + echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none" + echo "----------------------------------------------------------------" + echo + break + fi + + ;; + *) + error + ;; + esac + + done + + if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then + lt_v2ray_port=true + fi + if [[ $shadowsocks ]] && [[ $v2ray_dynamic_port_start_input -lt $ssport ]]; then + lt_ssport=true + fi + +} + +change_v2ray_dynamic_port_end() { + echo + while :; do + echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]" + read -p "$(echo -e "(当前动态结束端口: ${cyan}$v2ray_dynamicPort_end$none):")" v2ray_dynamic_port_end_input + [ -z $v2ray_dynamic_port_end_input ] && error && continue + case $v2ray_dynamic_port_end_input in + [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + + if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then + echo + echo " 不能小于或等于 V2Ray 动态端口开始范围" + error + elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then + echo + echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..." + echo + echo -e " 当前 V2Ray 端口: ${cyan}$v2ray_port$none" + error + elif [ $lt_ssport ] && [[ ${v2ray_dynamic_port_end_input} -ge $ssport ]]; then + echo + echo " V2Ray 动态端口结束范围 不能包括 Shadowsocks 端口..." + echo + echo -e " 当前 Shadowsocks 端口: ${cyan}$ssport$none" + error + else + echo + echo + echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none" + echo "----------------------------------------------------------------" + echo + break + fi + ;; + *) + error + ;; + esac + + done + +} +change_v2ray_id() { + echo + while :; do + echo -e "是否确定要修改用户ID [${magenta}Y/N$none]" + read -p "$(echo -e "默认 [${cyan}N$none]:")" y_n + if [[ -z $y_n ]]; then + echo + echo -e "$green 已取消修改用户ID...$none" + echo + break + else + if [[ $y_n == [Yy] ]]; then + echo + echo + echo -e "$yellow 修改用户ID = $cyan确定$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "21s/$v2ray_id/$uuid/;" $backup + v2ray_id=$uuid + config + clear + view_v2ray_config_info + download_v2ray_config_ask + break + elif [[ $y_n == [Nn] ]]; then + echo + echo -e "$green 已取消修改用户ID...$none" + echo + break + else + error + fi + fi + done +} +change_domain() { + if [[ $v2ray_transport == 4 && $caddy_installed ]]; then + while :; do + echo + echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！" + read -p "$(echo -e "(当前域名: ${cyan}$domain$none):") " new_domain + [ -z "$new_domain" ] && error && continue + if [[ $new_domain == $domain ]]; then + echo + echo -e " 跟当前域名一毛一样啊...修改个鸡鸡哦" + echo + error && continue + fi + echo + echo + echo -e "$yellow 你的域名 = $cyan$new_domain$none" + echo "----------------------------------------------------------------" + break + done + get_ip + echo + echo + echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none" + echo + echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none" + echo + echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none" + echo "----------------------------------------------------------------" + echo + + while :; do + + read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record + if [[ -z "$record" ]]; then + error + else + if [[ "$record" == [Yy] ]]; then + echo + echo + echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none" + echo "----------------------------------------------------------------" + echo + pause + domain_check + sed -i "27s/$domain/$new_domain/" $backup + domain=$new_domain + caddy_config + config + clear + view_v2ray_config_info + download_v2ray_config_ask + break + else + error + fi + fi + + done + else + echo + echo -e "$red 抱歉...不支持修改...$none" + echo + echo -e " 备注..修改 TLS 域名仅支持传输协议为 ${yellow}WebSocket + TLS$none 并且$yellow 自动配置 TLS = 打开$none" + echo + echo -e " 当前传输协议为: ${cyan}${transport[$v2ray_transport - 1]}${none}" + echo + if [[ $caddy_installed ]]; then + echo -e " 自动配置 TLS = ${cyan}打开$none" + else + echo -e " 自动配置 TLS = $red关闭$none" + fi + echo + fi +} +change_ws_path_config() { + if [[ $v2ray_transport == 4 && $caddy_installed ]] && [[ $is_ws_path ]]; then + echo + while :; do + echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可" + read -p "$(echo -e "(当前分流的路径: [${cyan}/${ws_path}$none]):")" new_ws_path + [[ -z $new_ws_path ]] && error && continue + + case $new_ws_path in + $ws_path) + echo + echo -e " 大佬...跟 当前分流的路径 一毛一样啊...修改个鸡鸡哦 " + echo + error + ;; + *[/$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... " + echo + error + ;; + *) + echo + echo + echo -e "$yellow 分流的路径 = ${cyan}/${new_ws_path}$none" + echo "----------------------------------------------------------------" + echo + break + ;; + esac + done + pause + sed -i "43s/$ws_path/$new_ws_path/" $backup + ws_path=$new_ws_path + caddy_config + config + clear + view_v2ray_config_info + download_v2ray_config_ask + elif [[ $v2ray_transport == 4 && $caddy_installed ]]; then + ws_path_config_ask + if [[ $new_ws_path ]]; then + sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + echo "$proxy_site" >>$backup + ws_path=$new_ws_path + is_ws_path=true + caddy_config + config + clear + view_v2ray_config_info + download_v2ray_config_ask + else + echo + echo + echo " 给大佬点赞....好果断的放弃配置 网站伪装 和 路径分流" + echo + echo + fi + else + echo + echo -e "$red 抱歉...不支持修改...$none" + echo + echo -e " 备注..修改 分流的路径 仅支持传输协议为 ${yellow}WebSocket + TLS$none 并且$yellow 自动配置 TLS = 打开$none" + echo + echo -e " 当前传输协议为: ${cyan}${transport[$v2ray_transport - 1]}${none}" + echo + if [[ $caddy_installed ]]; then + echo -e " 自动配置 TLS = ${cyan}打开$none" + else + echo -e " 自动配置 TLS = $red关闭$none" + fi + echo + change_v2ray_transport_ask + fi + +} +change_proxy_site_config() { + if [[ $v2ray_transport == 4 && $caddy_installed ]] && [[ $is_ws_path ]]; then + echo + while :; do + echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com" + echo -e "举例...你当前的域名是$green $domain $none, 伪装的网址的是 https://liyafly.com" + echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" + echo -e "其实就是一个反代...明白就好..." + echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" + read -p "$(echo -e "(当前伪装的网址: [${cyan}$(sed '$!d' $backup)$none]):")" proxy_site + [[ -z $proxy_site ]] && error && continue + + case $proxy_site in + *) + echo + echo + echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none" + echo "----------------------------------------------------------------" + echo + break + ;; + esac + done + pause + sed -i "$ d" $backup + echo "$proxy_site" >>$backup + caddy_config + echo + echo + echo " 哎哟...好像是修改成功了..." + echo + echo -e " 赶紧打开你的域名 ${cyan}https://${domain}$none 检查一下看看" + echo + echo + elif [[ $v2ray_transport == 4 && $caddy_installed ]]; then + ws_path_config_ask + if [[ $new_ws_path ]]; then + sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + echo "$proxy_site" >>$backup + ws_path=$new_ws_path + is_ws_path=true + caddy_config + config + clear + view_v2ray_config_info + download_v2ray_config_ask + else + echo + echo + echo " 给大佬点赞....好果断的放弃配置 网站伪装 和 路径分流" + echo + echo + fi + else + echo + echo -e "$red 抱歉...不支持修改...$none" + echo + echo -e " 备注..修改 伪装的网址 仅支持传输协议为 ${yellow}WebSocket + TLS$none 并且$yellow 自动配置 TLS = 打开$none" + echo + echo -e " 当前传输协议为: ${cyan}${transport[$v2ray_transport - 1]}${none}" + echo + if [[ $caddy_installed ]]; then + echo -e " 自动配置 TLS = ${cyan}打开$none" + else + echo -e " 自动配置 TLS = $red关闭$none" + fi + echo + change_v2ray_transport_ask + fi + +} +domain_check() { + # test_domain=$(dig $new_domain +short) + test_domain=$(ping $new_domain -c 1 | grep -oP -m1 "(\d+\.){3}\d+") + if [[ $test_domain != $ip ]]; then + echo + echo -e "$red 检测域名解析错误....$none" + echo + echo -e " 你的域名: $yellow$new_domain$none 未解析到: $cyan$ip$none" + echo + echo -e " 你的域名当前解析到: $cyan$test_domain$none" + echo + echo "备注...如果你的域名是使用 Cloudflare 解析的话..在 Status 那里点一下那图标..让它变灰" + echo + exit 1 + fi +} +disable_ws_path() { + if [[ $v2ray_transport == 4 && $caddy_installed ]] && [[ $is_ws_path ]]; then + echo + + while :; do + echo -e "是否关闭 ${yellow}网站伪装 和 路径分流${none} [${magenta}Y/N$none]" + read -p "$(echo -e "(默认 [${cyan}N$none]):") " y_n + [[ -z "$y_n" ]] && y_n="n" + if [[ "$y_n" == [Yy] ]]; then + echo + echo + echo -e "$yellow 关闭 网站伪装 和 路径分流 = $cyan是$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "41s/true/false/" $backup + is_ws_path='' + caddy_config + config + clear + view_v2ray_config_info + download_v2ray_config_ask + break + elif [[ "$y_n" == [Nn] ]]; then + echo + echo -e " $green已取消关闭 网站伪装 和 路径分流 ....$none" + echo + break + else + error + fi + + done + else + echo + echo -e "$red 抱歉...不支持修改...$none" + echo + echo -e " 当前传输协议为: ${cyan}${transport[$v2ray_transport - 1]}${none}" + echo + if [[ $caddy_installed ]]; then + echo -e " 自动配置 TLS = ${cyan}打开$none" + else + echo -e " 自动配置 TLS = $red关闭$none" + fi + echo + if [[ $is_ws_path ]]; then + echo -e " 路径分流 = ${cyan}打开$none" + else + echo -e " 路径分流 = $red关闭$none" + fi + echo + echo -e " 必须为 WebSocket + TLS 传输协议, 自动配置 TLS = ${cyan}打开$none, 路径分流 = ${cyan}打开$none, 才能修改" + echo + + fi +} +blocked_hosts() { + if [[ $is_blocked_ad ]]; then + local _info="$green已开启$none" + else + local _info="$red已关闭$none" + fi + _opt='' + while :; do + echo + echo -e "$yellow 1. $none开启 广告拦截" + echo + echo -e "$yellow 2. $none关闭 广告拦截" + echo + echo "备注: 广告拦截是基于 域名 拦截的..所以也许会造成浏览网页的时候出现部分元素留白..或者其他问题" + echo + echo "反馈问题或请求拦截更多域名: https://github.com/233boy/v2ray/issues" + echo + echo -e "当前广告拦截状态: $_info" + echo + read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + if [[ $is_blocked_ad ]]; then + echo + echo -e " 大胸弟...难不成你没有看到 (当前广告拦截状态: $_info) 这个帅帅的提示么.....还开启个鸡鸡哦" + echo + else + echo + echo + echo -e "$yellow 广告拦截 = $cyan开启$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "39s/false/true/" $backup + is_blocked_ad=true + config + echo + echo + echo -e "$green 广告拦截已开启...如果出现异常..那就关闭它咯$none" + echo + fi + break + ;; + 2) + if [[ $is_blocked_ad ]]; then + echo + echo + echo -e "$yellow 广告拦截 = $cyan关闭$none" + echo "----------------------------------------------------------------" + echo + pause + sed -i "39s/true/false/" $backup + is_blocked_ad='' + config + echo + echo + echo -e "$red 广告拦截已关闭...不过你也可以随时重新开启 ...只要你喜欢$none" + echo + else + echo + echo -e " 大胸弟...难不成你没有看到 (当前广告拦截状态: $_info) 这个帅帅的提示么.....还关闭个鸡鸡哦" + echo + fi + break + ;; + *) + error + ;; + esac + fi + done + +} +v2ray_service() { + while :; do + echo + echo -e "$yellow 1. $none启动 V2Ray" + echo + echo -e "$yellow 2. $none停止 V2Ray" + echo + echo -e "$yellow 3. $none重启 V2Ray" + echo + echo -e "$yellow 4. $none查看访问日志" + echo + echo -e "$yellow 5. $none查看错误日志" + echo + read -p "$(echo -e "请选择 [${magenta}1-5$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + start_v2ray + break + ;; + 2) + stop_v2ray + break + ;; + 3) + restart_v2ray + break + ;; + 4) + view_v2ray_log + break + ;; + 5) + view_v2ray_error_log + break + ;; + *) + error + ;; + esac + fi + done +} +start_v2ray() { + if [[ $v2ray_pid ]]; then + echo + echo -e "${green} V2Ray 正在运行...无需再启动$none" + echo + else + + # systemctl start v2ray + service v2ray start >/dev/null 2>&1 + local is_v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}') + if [[ $is_v2ray_pid ]]; then + echo + echo -e "${green} V2Ray 已启动$none" + echo + else + echo + echo -e "${red} V2Ray 启动失败！$none" + echo + fi + + fi +} +stop_v2ray() { + if [[ $v2ray_pid ]]; then + # systemctl stop v2ray + service v2ray stop >/dev/null 2>&1 + echo + echo -e "${green} V2Ray 已停止$none" + echo + else + echo + echo -e "${red} V2Ray 没有在运行$none" + echo + fi +} +restart_v2ray() { + # systemctl restart v2ray + service v2ray restart >/dev/null 2>&1 + local is_v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}') + if [[ $is_v2ray_pid ]]; then + echo + echo -e "${green} V2Ray 重启完成 $none" + echo + else + echo + echo -e "${red} V2Ray 重启失败！$none" + echo + fi +} +view_v2ray_log() { + echo + echo -e "$green 按 Ctrl + C 即可退出...$none" + echo + tail -f /var/log/v2ray/access.log +} +view_v2ray_error_log() { + echo + echo -e "$green 按 Ctrl + C 即可退出...$none" + echo + tail -f /var/log/v2ray/error.log +} +download_v2ray_config() { + while :; do + echo + echo -e "$yellow 1. $none直接下载 V2Ray 客户端配置文件(仅支持 Xshell)" + echo + echo -e "$yellow 2. $none生成 V2Ray 客户端配置文件下载链接" + echo + echo -e "$yellow 3. $none生成 V2Ray 配置信息链接" + echo + echo -e "$yellow 4. $none生成 V2Ray 配置二维码链接" + echo + read -p "$(echo -e "请选择 [${magenta}1-4$none]:")" other_opt + if [[ -z $other_opt ]]; then + error + else + case $other_opt in + 1) + get_v2ray_config + break + ;; + 2) + get_v2ray_config_link + break + ;; + 3) + get_v2ray_config_info_link + break + ;; + 4) + get_v2ray_config_qr_link + break + ;; + *) + error + ;; + esac + fi + done +} +get_v2ray_config() { + echo + echo " 如果你当前使用的 SSH 客户端不是 Xshell 的话...下载 V2Ray 客户端配置文件将会出现卡死情况" + echo + while :; do + read -p "$(echo -e "不要BB...哥就是在使用 Xshell [${magenta}Y$none]:")" is_xshell + if [[ -z $is_xshell ]]; then + error + else + if [[ $is_xshell == [yY] ]]; then + echo + echo "开始下载....请选择 V2Ray 客户端配置文件保存位置" + echo + sz /etc/v2ray/233blog_v2ray.zip + echo + echo + echo -e "$green 下载完成咯...$none" + echo + echo -e "$yellow 解压密码 = ${cyan}233blog.com$none" + echo + echo -e "$yellow SOCKS 监听端口 = ${cyan}2333${none}" + echo + echo -e "${yellow} HTTP 监听端口 = ${cyan}6666$none" + echo + echo "V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo + break + else + error + fi + fi + done +} +get_v2ray_config_link() { + echo + echo -e "$green 正在生成链接.... 稍等片刻即可....$none" + echo + local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local link=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random}_233blog_v2ray.zip") + if [[ $link ]]; then + echo + echo "---------- V2Ray 客户端配置文件链接 -------------" + echo + echo -e "$yellow 链接 = $cyan$link$none" + echo + echo -e "$yellow 解压密码 = ${cyan}233blog.com$none" + echo + echo -e "$yellow SOCKS 监听端口 = ${cyan}2333${none}" + echo + echo -e "${yellow} HTTP 监听端口 = ${cyan}6666$none" + echo + echo " V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo + echo "备注...链接将在 14 天后失效" + echo + echo "提醒...请不要把链接分享出去...除非你有特别的理由...." + echo + else + echo + echo -e "$red 哎呀呀呀...出错咯...请重试$none" + echo + fi +} +create_v2ray_config_text() { + + get_transport_args + + echo + echo + echo "---------- V2Ray 配置信息 -------------" + if [[ $v2ray_transport == "4" ]]; then + if [[ ! $caddy_installed ]]; then + echo + echo " 警告！请自行配置 TLS...教程: https://233blog.com/post/19/" + fi + echo + echo "地址 (Address) = ${domain}" + echo + echo "端口 (Port) = 443" + echo + echo "用户ID (User ID / UUID) = ${v2ray_id}" + echo + echo "额外ID (Alter Id) = 233" + echo + echo "传输协议 (Network) = ${network}" + echo + echo "伪装类型 (header type) = ${header}" + echo + if [[ $is_ws_path ]]; then + echo -e "$yellow WebSocket 路径 (WS path) = ${cyan}/${ws_path}$none" + echo + fi + echo "TLS (Enable TLS) = 打开" + echo + echo -e " 请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) " + echo + if [[ $is_blocked_ad ]]; then + echo " 备注: 广告拦截已开启.." + echo + fi + else + [[ -z $ip ]] && get_ip + echo + echo "地址 (Address) = ${ip}" + echo + echo "端口 (Port) = $v2ray_port" + echo + echo "用户ID (User ID / UUID) = ${v2ray_id}" + echo + echo "额外ID (Alter Id) = 233" + echo + echo "传输协议 (Network) = ${network}" + echo + echo "伪装类型 (header type) = ${header}" + echo + if [[ $obfs ]]; then + echo -e "请将 Obfs 设置为 $obfs ...并忽略 传输协议... (如果你使用 Pepi / ShadowRay) " + echo + else + echo -e "帅帅的提示...此 V2Ray 配置不支持 Pepi / ShadowRay" + echo + fi + fi + if [[ $v2ray_transport -ge 9 && $is_blocked_ad ]]; then + echo "备注: 动态端口已启用...广告拦截已开启..." + echo + elif [[ $v2ray_transport -ge 9 ]]; then + echo "备注: 动态端口已启用..." + echo + elif [[ $is_blocked_ad ]]; then + echo "备注: 广告拦截已开启.." + echo + fi + echo "---------- END -------------" + echo + echo "V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo +} +get_v2ray_config_info_link() { + echo + echo -e "$green 正在生成链接.... 稍等片刻即可....$none" + echo + create_v2ray_config_text >/tmp/233blog_v2ray.txt + local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local link=$(curl -s --upload-file /tmp/233blog_v2ray.txt "https://transfer.sh/${random}_233blog_v2ray.txt") + if [[ $link ]]; then + echo + echo "---------- V2Ray 配置信息链接-------------" + echo + echo -e "$yellow 链接 = $cyan$link$none" + echo + echo -e " V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo + echo "备注...链接将在 14 天后失效..." + echo + echo "提醒...请不要把链接分享出去...除非你有特别的理由...." + echo + else + echo + echo -e "$red 哎呀呀呀...出错咯...请重试$none" + echo + fi + rm -rf /tmp/233blog_v2ray.txt +} +get_v2ray_config_qr_link() { + + create_vmess_URL_config + + if [[ $obfs ]]; then + if [[ $v2ray_transport == 4 ]]; then + ip_or_domain=$domain + else + ip_or_domain=$ip + fi + local shadowray_qr="vmess://$(echo -n "aes-128-cfb:${v2ray_id}@${ip_or_domain}:${v2ray_port}" | base64)?remarks=233blog_v2ray_${ip_or_domain}&obfs=${obfs}" + echo "${shadowray_qr}" >/etc/v2ray/shadowray_qr.txt + sed -i 'N;s/\n//' /etc/v2ray/shadowray_qr.txt + fi + echo + echo -e "$green 正在生成链接.... 稍等片刻即可....$none" + echo + case $v2ray_transport in + [1-4] | 9 | 10 | 11) + local ios_qr=true + local random3=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + cat /etc/v2ray/shadowray_qr.txt | qrencode -s 50 -o /tmp/233blog_shadowray_qr.png + local link3=$(curl -s --upload-file /tmp/233blog_shadowray_qr.png "https://transfer.sh/${random3}_233blog_v2ray.png") + ;; + esac + local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | base64)" + echo $vmess >/etc/v2ray/vmess.txt + cat /etc/v2ray/vmess.txt | qrencode -s 50 -o /tmp/233blog_v2ray.png + local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local link=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random}_233blog_v2ray.png") + if [[ $link ]]; then + echo + echo "---------- V2Ray 二维码链接 -------------" + echo + echo -e "$yellow 适用于 V2RayNG / Kitsunebi = $cyan$link$none" + echo + if [[ $ios_qr && $link3 ]]; then + echo -e "$yellow 适用于 Pepi / ShadowRay = $cyan${link3}$none" + echo + echo " 请在 Pepi / ShadowRay 配置界面将 Alter Id 设置为 233 (如果你使用 Pepi / ShadowRay)" + if [[ $v2ray_transport == 4 ]]; then + echo + echo " 请在 Pepi / ShadowRay 配置界面打开 TLS (Enable TLS) (如果你使用 Pepi / ShadowRay)" + fi + elif [[ $ios_qr ]]; then + echo -e "$red 生成适用于 Pepi / ShadowRay 的二维码链接 出错.... $none 请尝试使用${cyan} v2ray qr ${none}重新生成" + else + echo -e "$red 帅帅的提示...此 V2Ray 配置不支持 Pepi / ShadowRay...$none" + fi + echo + echo " V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo + echo "备注...链接将在 14 天后失效" + echo + echo "提醒...请不要把链接分享出去...除非你有特别的理由...." + echo + else + echo + echo -e "$red 哎呀呀呀...出错咯...$none" + echo + echo -e "请尝试使用${cyan} v2ray qr ${none}重新生成" + echo + fi + rm -rf /tmp/233blog_v2ray.png + rm -rf /etc/v2ray/vmess_qr.json + rm -rf /etc/v2ray/vmess.txt + if [[ $ios_qr ]]; then + rm -rf /tmp/233blog_shadowray_qr.png + rm -rf /etc/v2ray/shadowray_qr.txt + fi +} +get_v2ray_vmess_URL_link() { + create_vmess_URL_config + local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | base64)" + echo + echo "---------- V2Ray vmess URL / 仅适合部分客户端 -------------" + echo + echo $vmess + echo + rm -rf /etc/v2ray/vmess_qr.json +} +other() { + while :; do + echo + echo -e "$yellow 1. $none安装 BBR" + echo + echo -e "$yellow 2. $none安装 LotServer(锐速)" + echo + echo -e "$yellow 3. $none卸载 LotServer(锐速)" + echo + read -p "$(echo -e "请选择 [${magenta}1-3$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + install_bbr + break + ;; + 2) + install_lotserver + break + ;; + 3) + uninstall_lotserver + break + ;; + *) + error + ;; + esac + fi + done +} +install_bbr() { + local test1=$(sed -n '/net.ipv4.tcp_congestion_control/p' /etc/sysctl.conf) + local test2=$(sed -n '/net.core.default_qdisc/p' /etc/sysctl.conf) + if [[ $(uname -r | cut -b 1) -eq 4 ]]; then + case $(uname -r | cut -b 3-4) in + 9. | [1-9][0-9]) + if [[ $test1 == "net.ipv4.tcp_congestion_control = bbr" && $test2 == "net.core.default_qdisc = fq" ]]; then + local is_bbr=true + else + local try_enable_bbr=true + fi + ;; + esac + fi + if [[ $is_bbr ]]; then + echo + echo -e "$green BBR 已经启用啦...无需再安装$none" + echo + elif [[ $try_enable_bbr ]]; then + sed -i '/net.ipv4.tcp_congestion_control/d' /etc/sysctl.conf + sed -i '/net.core.default_qdisc/d' /etc/sysctl.conf + echo "net.ipv4.tcp_congestion_control = bbr" >>/etc/sysctl.conf + echo "net.core.default_qdisc = fq" >>/etc/sysctl.conf + sysctl -p >/dev/null 2>&1 + echo + echo -e "$green ..由于你的小鸡鸡的内核支持开启 BBR ...已经为你启用 BBR 优化....$none" + echo + else + # https://teddysun.com/489.html + bash <(curl -s -L https://github.com/teddysun/across/raw/master/bbr.sh) + fi +} +install_lotserver() { + # https://moeclub.org/2017/03/08/14/ + wget --no-check-certificate -qO /tmp/appex.sh "https://raw.githubusercontent.com/0oVicero0/serverSpeeder_Install/master/appex.sh" + bash /tmp/appex.sh 'install' + rm -rf /tmp/appex.sh +} +uninstall_lotserver() { + # https://moeclub.org/2017/03/08/14/ + wget --no-check-certificate -qO /tmp/appex.sh "https://raw.githubusercontent.com/0oVicero0/serverSpeeder_Install/master/appex.sh" + bash /tmp/appex.sh 'uninstall' + rm -rf /tmp/appex.sh +} + +open_port() { + if [[ $1 != "multiport" ]]; then + # if [[ $cmd == "apt-get" ]]; then + iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT + iptables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT + ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT + ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT + + # iptables-save >/etc/iptables.rules.v4 + # ip6tables-save >/etc/iptables.rules.v6 + # else + # firewall-cmd --permanent --zone=public --add-port=$1/tcp + # firewall-cmd --permanent --zone=public --add-port=$1/udp + # firewall-cmd --reload + # fi + else + # if [[ $cmd == "apt-get" ]]; then + local multiport="${v2ray_dynamic_port_start_input}:${v2ray_dynamic_port_end_input}" + iptables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT + iptables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT + ip6tables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT + ip6tables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT + + # iptables-save >/etc/iptables.rules.v4 + # ip6tables-save >/etc/iptables.rules.v6 + # else + # local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}" + # firewall-cmd --permanent --zone=public --add-port=$multi_port/tcp + # firewall-cmd --permanent --zone=public --add-port=$multi_port/udp + # firewall-cmd --reload + # fi + fi + if [[ $cmd == "apt-get" ]]; then + iptables-save >/etc/iptables.rules.v4 + ip6tables-save >/etc/iptables.rules.v6 + else + service iptables save >/dev/null 2>&1 + service ip6tables save >/dev/null 2>&1 + fi + +} +del_port() { + if [[ $1 != "multiport" ]]; then + # if [[ $cmd == "apt-get" ]]; then + iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT + iptables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT + ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT + ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT + # else + # firewall-cmd --permanent --zone=public --remove-port=$1/tcp + # firewall-cmd --permanent --zone=public --remove-port=$1/udp + # fi + else + # if [[ $cmd == "apt-get" ]]; then + local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}" + iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT + iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT + ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT + ip6tables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT + # else + # local ports="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}" + # firewall-cmd --permanent --zone=public --remove-port=$ports/tcp + # firewall-cmd --permanent --zone=public --remove-port=$ports/udp + # fi + fi + if [[ $cmd == "apt-get" ]]; then + iptables-save >/etc/iptables.rules.v4 + ip6tables-save >/etc/iptables.rules.v6 + else + service iptables save >/dev/null 2>&1 + service ip6tables save >/dev/null 2>&1 + fi +} +update() { + while :; do + echo + echo -e "$yellow 1. $none更新 V2Ray 主程序" + echo + echo -e "$yellow 2. $none更新 V2Ray 管理脚本" + echo + read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" _opt + if [[ -z $_opt ]]; then + error + else + case $_opt in + 1) + update_v2ray + break + ;; + 2) + update_v2ray.sh + exit + break + ;; + *) + error + ;; + esac + fi + done +} +update_v2ray() { + [ -d /tmp/v2ray ] && rm -rf /tmp/v2ray + mkdir -p /tmp/v2ray + + v2ray_tmp_file="/tmp/v2ray/v2ray.zip" + v2ray_latest_ver="$(curl -s https://api.github.com/repos/v2ray/v2ray-core/releases/latest | grep 'tag_name' | cut -d\" -f4)" + if [[ $v2ray_ver != $v2ray_latest_ver ]]; then + echo + echo -e " $green 咦...发现新版本耶....正在拼命更新.......$none" + echo + v2ray_download_link="https://github.com/v2ray/v2ray-core/releases/download/$v2ray_latest_ver/v2ray-linux-${v2ray_bit}.zip" + + if ! wget --no-check-certificate -O "$v2ray_tmp_file" $v2ray_download_link; then + echo -e " + $red 下载 V2Ray 文件失败啦..可能是你的小鸡鸡的网络太辣鸡了...重新尝试更新也许能解决$none + " && exit 1 + fi + + unzip $v2ray_tmp_file -d "/tmp/v2ray/" + mkdir -p /usr/bin/v2ray + cp -f "/tmp/v2ray/v2ray-${v2ray_latest_ver}-linux-${v2ray_bit}/v2ray" "/usr/bin/v2ray/v2ray" + chmod +x "/usr/bin/v2ray/v2ray" + cp -f "/tmp/v2ray/v2ray-${v2ray_latest_ver}-linux-${v2ray_bit}/v2ctl" "/usr/bin/v2ray/v2ctl" + chmod +x "/usr/bin/v2ray/v2ctl" + # systemctl restart v2ray + # service v2ray restart >/dev/null 2>&1 + do_service restart v2ray + echo + echo -e " $green 更新成功啦...当前 V2Ray 版本: ${cyan}$v2ray_latest_ver$none" + echo + echo -e " $yellow 温馨提示: 为了避免出现莫名其妙的问题...所以客户端 V2Ray 版本最好也是: ${cyan}$v2ray_latest_ver$none" + echo + rm -rf /tmp/v2ray + else + echo + echo -e " $green 木有发现新版本....$none" + echo + fi +} +update_v2ray.sh() { + local latest_version=$(curl -s -L https://raw.githubusercontent.com/233boy/v2ray/test/v2ray.old.sh | grep '_version' -m1 | cut -d\" -f2) + if [[ $latest_version == $_version ]]; then + echo + echo -e "$green 木有发现新版本 $none" + echo + else + echo + echo -e " $green 咦...发现新版本耶....正在拼命更新.......$none" + echo + cd /etc/v2ray/233boy/v2ray + git pull + cp -f /etc/v2ray/233boy/v2ray/v2ray.sh /usr/local/bin/v2ray + chmod +x /usr/local/bin/v2ray + echo + echo -e "$green 更新成功啦...当前 V2Ray 管理脚本 版本: ${cyan}$latest_version$none" + echo + fi + +} +uninstall_v2ray() { + while :; do + echo + read -p "$(echo -e "是否卸载 ${yellow}V2Ray$none [${magenta}Y/N$none]:")" uninstall_v2ray_ask + if [[ -z $uninstall_v2ray_ask ]]; then + error + else + case $uninstall_v2ray_ask in + Y | y) + is_uninstall_v2ray=true + echo + echo -e "$yellow 卸载 V2Ray = ${cyan}是${none}" + echo + break + ;; + N | n) + echo + echo -e "$red 卸载已取消...$none" + echo + break + ;; + *) + error + ;; + esac + fi + done + + if [[ $caddy_installed ]] && [[ -f /usr/local/bin/caddy && -f /etc/caddy/Caddyfile ]]; then + while :; do + echo + read -p "$(echo -e "是否卸载 ${yellow}Caddy$none [${magenta}Y/N$none]:")" uninstall_caddy_ask + if [[ -z $uninstall_caddy_ask ]]; then + error + else + case $uninstall_caddy_ask in + Y | y) + is_uninstall_caddy=true + echo + echo -e "$yellow 卸载 Caddy = ${cyan}是${none}" + echo + break + ;; + N | n) + echo + echo -e "$yellow 卸载 Caddy = ${cyan}否${none}" + echo + break + ;; + *) + error + ;; + esac + fi + done + fi + + if [[ $is_uninstall_v2ray && $is_uninstall_caddy ]]; then + pause + echo + + if [[ $shadowsocks ]]; then + del_port $ssport + fi + + if [[ $v2ray_transport == "4" ]]; then + del_port "80" + del_port "443" + del_port $v2ray_port + elif [[ $v2ray_transport -ge 9 ]]; then + del_port $v2ray_port + del_port "multiport" + else + del_port $v2ray_port + fi + + [ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables + + # [ $v2ray_pid ] && systemctl stop v2ray + [ $v2ray_pid ] && do_service stop v2ray + + rm -rf /usr/bin/v2ray + rm -rf /usr/local/bin/v2ray + rm -rf /etc/v2ray + rm -rf /var/log/v2ray + + # [ $caddy_pid ] && systemctl stop caddy + [ $caddy_pid ] && do_service stop caddy + + rm -rf /usr/local/bin/caddy + rm -rf /etc/caddy + rm -rf /etc/ssl/caddy + + if [[ $systemd ]]; then + systemctl disable v2ray >/dev/null 2>&1 + rm -rf /lib/systemd/system/v2ray.service + systemctl disable caddy >/dev/null 2>&1 + rm -rf /lib/systemd/system/caddy.service + else + update-rc.d -f caddy remove >/dev/null 2>&1 + update-rc.d -f v2ray remove >/dev/null 2>&1 + rm -rf /etc/init.d/caddy + rm -rf /etc/init.d/v2ray + fi + # clear + echo + echo -e "$green V2Ray 卸载完成啦 ....$none" + echo + echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我" + echo + echo "反馈问题: https://github.com/233boy/v2ray/issues" + echo + + elif [[ $is_uninstall_v2ray ]]; then + pause + echo + + if [[ $shadowsocks ]]; then + del_port $ssport + fi + + if [[ $v2ray_transport == "4" ]]; then + del_port "80" + del_port "443" + del_port $v2ray_port + elif [[ $v2ray_transport -ge 9 ]]; then + del_port $v2ray_port + del_port "multiport" + else + del_port $v2ray_port + fi + + [ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables + + # [ $v2ray_pid ] && systemctl stop v2ray + [ $v2ray_pid ] && do_service stop v2ray + + rm -rf /usr/bin/v2ray + rm -rf /usr/local/bin/v2ray + rm -rf /etc/v2ray + rm -rf /var/log/v2ray + if [[ $systemd ]]; then + systemctl disable v2ray >/dev/null 2>&1 + rm -rf /lib/systemd/system/v2ray.service + else + update-rc.d -f v2ray remove >/dev/null 2>&1 + rm -rf /etc/init.d/v2ray + fi + # clear + echo + echo -e "$green V2Ray 卸载完成啦 ....$none" + echo + echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我" + echo + echo "反馈问题: https://github.com/233boy/v2ray/issues" + echo + fi +} +config() { + if [[ $shadowsocks || $new_shadowsocks ]]; then + if [[ $v2ray_transport_opt ]]; then + if [[ $is_blocked_ad ]]; then + case $v2ray_transport_opt in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + else + case $v2ray_transport_opt in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + fi + else + if [[ $is_blocked_ad ]]; then + case $v2ray_transport in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + else + case $v2ray_transport in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + fi + fi + + else + if [[ $v2ray_transport_opt ]]; then + if [[ $is_blocked_ad ]]; then + case $v2ray_transport_opt in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/sblocked_hosts/erver/tcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + else + case $v2ray_transport_opt in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + fi + else + if [[ $is_blocked_ad ]]; then + case $v2ray_transport in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/sblocked_hosts/erver/tcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + else + case $v2ray_transport in + 1) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 2) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 3) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 4) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json" + ;; + 5 | 6 | 7 | 8) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + 9) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json" + ;; + 10) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json" + ;; + 11) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json" + ;; + 12 | 13 | 14 | 15) + v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_dynamic.json" + v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json" + ;; + esac + fi + fi + + fi + + cp -f $v2ray_server_config_file $v2ray_server_config + cp -f $v2ray_client_config_file $v2ray_client_config + + if [[ $new_shadowsocks ]]; then + case $v2ray_transport in + 1) + sed -i "28s/$ssport/$new_ssport/; 30s/$ssciphers/$new_ssciphers/; 31s/$sspass/$new_sspass/" $v2ray_server_config + ;; + 2) + sed -i "50s/$ssport/$new_ssport/; 52s/$ssciphers/$new_ssciphers/; 53s/$sspass/$new_sspass/" $v2ray_server_config + ;; + 3 | 4) + sed -i "31s/$ssport/$new_ssport/; 33s/$ssciphers/$new_ssciphers/; 34s/$sspass/$new_sspass/" $v2ray_server_config + ;; + 5 | 6 | 7 | 8) + sed -i "43s/$ssport/$new_ssport/; 45s/$ssciphers/$new_ssciphers/; 46s/$sspass/$new_sspass/" $v2ray_server_config + ;; + 9) + sed -i "31s/$ssport/$new_ssport/; 33s/$ssciphers/$new_ssciphers/; 34s/$sspass/$new_sspass/; 42s/10000-20000/$port_range/" $v2ray_server_config + ;; + 10) + sed -i "67s/$ssport/$new_ssport/; 69s/$ssciphers/$new_ssciphers/; 70s/$sspass/$new_sspass/; 78s/10000-20000/$port_range/" $v2ray_server_config + ;; + *) + sed -i "34s/$ssport/$new_ssport/; 36s/$ssciphers/$new_ssciphers/; 37s/$sspass/$new_sspass/; 45s/10000-20000/$port_range/" $v2ray_server_config + ;; + esac + + case $v2ray_transport in + 6) + sed -i "31s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 7) + sed -i "31s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 8) + sed -i "31s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + 13) + sed -i "74s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 14) + sed -i "74s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 15) + sed -i "74s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + esac + elif [[ $shadowsocks ]]; then + if [[ $v2ray_transport_opt ]]; then + + case $v2ray_transport_opt in + 1) + sed -i "28s/6666/$ssport/; 30s/chacha20-ietf/$ssciphers/; 31s/233blog.com/$sspass/" $v2ray_server_config + ;; + 2) + sed -i "50s/6666/$ssport/; 52s/chacha20-ietf/$ssciphers/; 53s/233blog.com/$sspass/" $v2ray_server_config + ;; + 3 | 4) + sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/" $v2ray_server_config + ;; + 5 | 6 | 7 | 8) + sed -i "43s/6666/$ssport/; 45s/chacha20-ietf/$ssciphers/; 46s/233blog.com/$sspass/" $v2ray_server_config + ;; + 9) + sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/; 42s/10000-20000/$port_range/" $v2ray_server_config + ;; + 10) + sed -i "67s/6666/$ssport/; 69s/chacha20-ietf/$ssciphers/; 70s/233blog.com/$sspass/; 78s/10000-20000/$port_range/" $v2ray_server_config + ;; + *) + sed -i "34s/6666/$ssport/; 36s/chacha20-ietf/$ssciphers/; 37s/233blog.com/$sspass/; 45s/10000-20000/$port_range/" $v2ray_server_config + ;; + esac + + case $v2ray_transport_opt in + 6) + sed -i "31s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 7) + sed -i "31s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 8) + sed -i "31s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + 13) + sed -i "74s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 14) + sed -i "74s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 15) + sed -i "74s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + esac + + else + + case $v2ray_transport in + 1) + sed -i "28s/6666/$ssport/; 30s/chacha20-ietf/$ssciphers/; 31s/233blog.com/$sspass/" $v2ray_server_config + ;; + 2) + sed -i "50s/6666/$ssport/; 52s/chacha20-ietf/$ssciphers/; 53s/233blog.com/$sspass/" $v2ray_server_config + ;; + 3 | 4) + sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/" $v2ray_server_config + ;; + 5 | 6 | 7 | 8) + sed -i "43s/6666/$ssport/; 45s/chacha20-ietf/$ssciphers/; 46s/233blog.com/$sspass/" $v2ray_server_config + ;; + 9) + sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/; 42s/10000-20000/$port_range/" $v2ray_server_config + ;; + 10) + sed -i "67s/6666/$ssport/; 69s/chacha20-ietf/$ssciphers/; 70s/233blog.com/$sspass/; 78s/10000-20000/$port_range/" $v2ray_server_config + ;; + *) + sed -i "34s/6666/$ssport/; 36s/chacha20-ietf/$ssciphers/; 37s/233blog.com/$sspass/; 45s/10000-20000/$port_range/" $v2ray_server_config + ;; + esac + + case $v2ray_transport in + 6) + sed -i "31s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 7) + sed -i "31s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 8) + sed -i "31s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + 13) + sed -i "74s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 14) + sed -i "74s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 15) + sed -i "74s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + esac + + fi + + else + if [[ $v2ray_transport_opt ]]; then + case $v2ray_transport_opt in + 9) + sed -i "31s/10000-20000/$port_range/" $v2ray_server_config + ;; + 10) + sed -i "67s/10000-20000/$port_range/" $v2ray_server_config + ;; + 11 | 12 | 13 | 14 | 15) + sed -i "34s/10000-20000/$port_range/" $v2ray_server_config + ;; + esac + + case $v2ray_transport_opt in + 6) + sed -i "31s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 7) + sed -i "31s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 8) + sed -i "31s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + 13) + sed -i "63s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 14) + sed -i "63s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 15) + sed -i "63s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + esac + + else + + case $v2ray_transport in + 9) + sed -i "31s/10000-20000/$port_range/" $v2ray_server_config + ;; + 10) + sed -i "67s/10000-20000/$port_range/" $v2ray_server_config + ;; + 11 | 12 | 13 | 14 | 15) + sed -i "34s/10000-20000/$port_range/" $v2ray_server_config + ;; + esac + + case $v2ray_transport in + 6) + sed -i "31s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 7) + sed -i "31s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 8) + sed -i "31s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + 13) + sed -i "63s/none/utp/" $v2ray_server_config + sed -i "44s/none/utp/" $v2ray_client_config + ;; + 14) + sed -i "63s/none/srtp/" $v2ray_server_config + sed -i "44s/none/srtp/" $v2ray_client_config + ;; + 15) + sed -i "63s/none/wechat-video/" $v2ray_server_config + sed -i "44s/none/wechat-video/" $v2ray_client_config + ;; + esac + + fi + + fi + + sed -i "8s/2333/$v2ray_port/; 14s/$old_id/$v2ray_id/" $v2ray_server_config + + if [[ $v2ray_transport_opt -eq 4 || $v2ray_transport -eq 4 ]]; then + sed -i "s/233blog.com/$domain/; 22s/2333/443/; 25s/$old_id/$v2ray_id/" $v2ray_client_config + if [[ $is_ws_path ]]; then + sed -i "41s/233blog/$ws_path/" $v2ray_client_config + else + sed -i "41s/233blog//" $v2ray_client_config + fi + else + [[ -z $ip ]] && get_ip + sed -i "s/233blog.com/$ip/; 22s/2333/$v2ray_port/; 25s/$old_id/$v2ray_id/" $v2ray_client_config + fi + + zip -q -r -j --password "233blog.com" /etc/v2ray/233blog_v2ray.zip $v2ray_client_config + + if [[ $new_shadowsocks ]]; then + open_port $new_ssport + sed -i "31s/false/true/; 33s/$ssport/$new_ssport/; 35s/$sspass/$new_sspass/; 37s/$ssciphers/$new_ssciphers/" $backup + fi + + if [[ $v2ray_port == "80" ]]; then + if [[ $cmd == "yum" ]]; then + [[ $(pgrep "httpd") ]] && systemctl stop httpd >/dev/null 2>&1 + [[ $(command -v httpd) ]] && yum remove httpd -y >/dev/null 2>&1 + else + [[ $(pgrep "apache2") ]] && service apache2 stop >/dev/null 2>&1 + [[ $(command -v apache2) ]] && apt-get remove apache2* -y >/dev/null 2>&1 + fi + fi + + do_service restart v2ray +} +_boom_() { + echo + echo -e "$green ........... V2Ray 配置链接集合 by 233blog.com ..........$none" + echo + + create_v2ray_config_text >/tmp/233blog_v2ray.txt + + create_vmess_URL_config + + if [[ $obfs ]]; then + if [[ $v2ray_transport == 4 ]]; then + ip_or_domain=$domain + else + ip_or_domain=$ip + fi + local shadowray_qr="vmess://$(echo -n "aes-128-cfb:${v2ray_id}@${ip_or_domain}:${v2ray_port}" | base64)?remarks=233blog_v2ray_${ip_or_domain}&obfs=${obfs}" + echo "${shadowray_qr}" >/etc/v2ray/shadowray_qr.txt + sed -i 'N;s/\n//' /etc/v2ray/shadowray_qr.txt + fi + case $v2ray_transport in + [1-4] | 9 | 10 | 11) + local ios_qr=true + local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + cat /etc/v2ray/shadowray_qr.txt | qrencode -s 50 -o /tmp/233blog_shadowray_qr.png + local link=$(curl -s --upload-file /tmp/233blog_shadowray_qr.png "https://transfer.sh/${random}_233blog_v2ray.png") + ;; + esac + local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | base64)" + echo $vmess >/etc/v2ray/vmess.txt + cat /etc/v2ray/vmess.txt | qrencode -s 50 -o /tmp/233blog_v2ray.png + + local random1=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local random2=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local random3=$(echo $RANDOM-$RANDOM-$RANDOM | base64) + local link1=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random1}_233blog_v2ray.zip") + local link2=$(curl -s --upload-file /tmp/233blog_v2ray.txt "https://transfer.sh/${random2}_233blog_v2ray.txt") + local link3=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random3}_233blog_v2ray.png") + + if [[ $link && $link1 ]] && [[ $link2 && $link3 ]]; then + echo -e "$yellow 客户端配置文件链接: $cyan$link1$none" + echo + echo -e "$yellow 配置信息链接: $cyan$link2$none" + echo + echo -e "$yellow V2RayN / Kitsunebi 二维码链接: $cyan$link3$none" + echo + echo -e "$yellow Pepi / ShadowRay 二维码链接: $cyan$link$none" + echo + echo "V2Ray 客户端使用教程: https://233blog.com/post/20/" + echo + else + echo + echo -e "$red 哎呀..发生了一点意外的情况.....请重试....$none" + echo + fi + rm -rf /tmp/233blog_v2ray.txt + rm -rf /etc/v2ray/vmess_qr.json + rm -rf /etc/v2ray/shadowray_qr.txt + rm -rf /tmp/233blog_shadowray_qr.png + rm -rf /etc/v2ray/vmess.txt + rm -rf /tmp/233blog_v2ray.png + +} + +get_ip() { + ip=$(curl -s ipinfo.io/ip) +} + +error() { + + echo -e "\n$red 输入错误！$none\n" + +} + +pause() { + + read -rsp "$(echo -e "按$green Enter 回车键 $none继续....或按$red Ctrl + C $none取消.")" -d $'\n' + echo +} +do_service() { + if [[ $systemd ]]; then + systemctl $1 $2 + else + service $2 $1 + fi +} +_help() { + echo + echo "........... V2Ray 管理脚本帮助信息 by 233blog.com .........." + echo -e " + ${green}v2ray menu $none管理 V2Ray (同等于直接输入 v2ray) + + ${green}v2ray info $none查看 V2Ray 配置信息 + + ${green}v2ray config $none修改 V2Ray 配置 + + ${green}v2ray link $none生成 V2Ray 客户端配置文件链接 + + ${green}v2ray textlink $none生成 V2Ray 配置信息链接 + + ${green}v2ray qr $none生成 V2Ray 配置二维码链接 + + ${green}v2ray ss $none修改 Shadowsocks 配置 + + ${green}v2ray ssinfo $none查看 Shadowsocks 配置信息 + + ${green}v2ray ssqr $none生成 Shadowsocks 配置二维码链接 + + ${green}v2ray status $none查看 V2Ray 运行状态 + + ${green}v2ray start $none启动 V2Ray + + ${green}v2ray stop $none停止 V2Ray + + ${green}v2ray restart $none重启 V2Ray + + ${green}v2ray log $none查看 V2Ray 运行日志 + + ${green}v2ray update $none更新 V2Ray + + ${green}v2ray update.sh $none更新 V2Ray 管理脚本 + + ${green}v2ray uninstall $none卸载 V2Ray +" +} +menu() { + clear + while :; do + echo + echo "........... V2Ray 管理脚本 $_version by 233blog.com .........." + echo + echo -e "## V2Ray 版本: $cyan$v2ray_ver$none / V2Ray 状态: $v2ray_status ##" + echo + echo "帮助说明: https://233blog.com/post/16/" + echo + echo "反馈问题: https://github.com/233boy/v2ray/issues" + echo + echo "TG 群组: https://t.me/blog233" + echo + echo -e "$yellow 1. $none查看 V2Ray 配置" + echo + echo -e "$yellow 2. $none修改 V2Ray 配置" + echo + echo -e "$yellow 3. $none下载 V2Ray 配置 / 生成配置信息链接 / 生成二维码链接" + echo + echo -e "$yellow 4. $none查看 Shadowsocks 配置 / 生成二维码链接" + echo + echo -e "$yellow 5. $none修改 Shadowsocks 配置" + echo + echo -e "$yellow 6. $none启动 / 停止 / 重启 / 查看日志" + echo + echo -e "$yellow 7. $none更新 V2Ray / 更新 V2Ray 管理脚本" + echo + echo -e "$yellow 8. $none卸载 V2Ray" + echo + echo -e "$yellow 9. $none其他" + echo + echo -e "温馨提示...如果你不想执行选项...按$yellow Ctrl + C $none即可退出" + echo + read -p "$(echo -e "请选择菜单 [${magenta}1-9$none]:")" choose + if [[ -z $choose ]]; then + exit 1 + else + case $choose in + 1) + view_v2ray_config_info + break + ;; + 2) + change_v2ray_config + break + ;; + 3) + download_v2ray_config + break + ;; + 4) + get_shadowsocks_config + break + ;; + 5) + change_shadowsocks_config + break + ;; + 6) + v2ray_service + break + ;; + 7) + update + break + ;; + 8) + uninstall_v2ray + break + ;; + 9) + other + break + ;; + *) + error + ;; + esac + fi + done +} +args=$1 +[ -z $1 ] && args="menu" +case $args in +menu) + menu + ;; +i | info) + view_v2ray_config_info + ;; +c | config) + change_v2ray_config + ;; +l | link) + get_v2ray_config_link + ;; +L | infolink) + get_v2ray_config_info_link + ;; +q | qr) + get_v2ray_config_qr_link + ;; +s | ss) + change_shadowsocks_config + ;; +S | ssinfo) + view_shadowsocks_config_info + ;; +Q | ssqr) + get_shadowsocks_config_qr_link + ;; +status) + echo + if [[ $v2ray_transport == "4" && $caddy_installed ]]; then + echo -e " V2Ray 状态: $v2ray_status / Caddy 状态: $caddy_run_status" + else + echo -e " V2Ray 状态: $v2ray_status" + fi + echo + ;; +start) + start_v2ray + ;; +stop) + stop_v2ray + ;; +restart) + [[ $v2ray_transport == "4" && $caddy_installed ]] && do_service restart caddy + restart_v2ray + ;; +reload) + config + [[ $v2ray_transport == "4" && $caddy_installed ]] && caddy_config + clear + view_v2ray_config_info + download_v2ray_config_ask + ;; +log) + view_v2ray_log + ;; +url | URL) + get_v2ray_vmess_URL_link + ;; +u | update) + update_v2ray + ;; +U | update.sh) + update_v2ray.sh + exit + ;; +un | uninstall) + uninstall_v2ray + ;; +233 | 2333 | 233boy | 233blog | 233blog.com) + _boom_ + ;; +v | version) + echo + echo -e " 当前 V2Ray 版本: ${green}$v2ray_ver$none / 当前 V2Ray 管理脚本版本: ${cyan}$_version$none" + echo + ;; +bbr) + other + ;; +help | *) + _help + ;; +esac diff --git a/v2ray.sh b/v2ray.sh index dcd7880..fea96d3 100644 --- a/v2ray.sh +++ b/v2ray.sh @@ -10,7 +10,7 @@ none='\e[0m' # Root [[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1 -_version="v1.69" +_version="v2.0" cmd="apt-get" @@ -42,46 +42,41 @@ else fi -backup="/etc/v2ray/233blog_v2ray_backup.txt" +backup="/etc/v2ray/233blog_v2ray_backup.conf" if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then - v2ray_transport=$(sed -n '17p' $backup) - v2ray_port=$(sed -n '19p' $backup) - v2ray_id=$(sed -n '21p' $backup) - v2ray_dynamicPort_start=$(sed -n '23p' $backup) - v2ray_dynamicPort_end=$(sed -n '25p' $backup) - domain=$(sed -n '27p' $backup) - caddy_status=$(sed -n '29p' $backup) - shadowsocks_status=$(sed -n '31p' $backup) - ssport=$(sed -n '33p' $backup) - sspass=$(sed -n '35p' $backup) - ssciphers=$(sed -n '37p' $backup) - blocked_ad_status=$(sed -n '39p' $backup) - ws_path_status=$(sed -n '41p' $backup) - ws_path=$(sed -n '43p' $backup) - alterId=$(sed -n '45p' $backup) - + . $backup v2ray_ver=$(/usr/bin/v2ray/v2ray -version | head -n 1 | cut -d " " -f2) +elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then + + cp -f /etc/v2ray/233boy/v2ray/v2ray.old.sh /usr/local/bin/v2ray + chmod +x /usr/local/bin/v2ray + echo + echo -e " 哇哦.. 出现了一点小意外.. 当前环境不能使用$cyan v2.0 $nonet版本以上的管理脚本.. 已自动回退到旧版本" + echo + echo -e " 请使用命令$yellow v2ray reload $none重新加载配置...以避免发生莫名其妙的问题" + echo + exit 1 else echo -e " 哎呀哎呀…… ${red}出错咯...请重新安装V2Ray${none} ${yellow}~(^_^) ${none}" && exit 1 fi -if [[ $caddy_status == "true" ]]; then +if [[ $caddy_status ]]; then caddy_installed=true fi -if [[ $shadowsocks_status == "true" ]]; then +if [[ $shadowsocks_status ]]; then shadowsocks=true fi -if [[ $blocked_ad_status == "true" ]]; then +if [[ $blocked_ad_status ]]; then is_blocked_ad=true fi if [[ $v2ray_transport -ge 9 ]]; then dynamicPort=true port_range="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}" fi -if [[ $ws_path_status == "true" ]]; then +if [[ $ws_path_status ]]; then is_ws_path=true fi @@ -536,9 +531,9 @@ shadowsocks_password_config() { read -p "$(echo -e "(默认密码: ${cyan}233blog.com$none)"): " new_sspass [ -z "$new_sspass" ] && new_sspass="233blog.com" case $new_sspass in - */*) + *[/$]*) echo - echo -e " 由于这个脚本太辣鸡了..所以密码不能包括 $red/$none 这个符号.... " + echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... " echo error ;; @@ -627,7 +622,8 @@ change_shadowsocks_port() { echo "----------------------------------------------------------------" echo pause - sed -i "33s/$ssport/$new_ssport/" $backup + # sed -i "45s/=$ssport/=$new_ssport/" $backup + backup_config ssport del_port $ssport open_port $new_ssport ssport=$new_ssport @@ -657,9 +653,9 @@ change_shadowsocks_password() { echo " 跟当前密码一毛一样....修改个鸡鸡哦" error ;; - */*) + *[/$]*) echo - echo -e " 由于这个脚本太辣鸡了..所以密码不能包括 $red/$none 这个符号.... " + echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... " echo error ;; @@ -670,7 +666,8 @@ change_shadowsocks_password() { echo "----------------------------------------------------------------" echo pause - sed -i "35s/$sspass/$new_sspass/" $backup + # sed -i "48s/=$sspass/=$new_sspass/" $backup + backup_config sspass sspass=$new_sspass config clear @@ -710,7 +707,8 @@ change_shadowsocks_ciphers() { echo "----------------------------------------------------------------" echo pause - sed -i "37s/$ssciphers/$new_ssciphers/" $backup + # sed -i "51s/=$ssciphers/=$new_ssciphers/" $backup + backup_config ssciphers ssciphers=$new_ssciphers config clear @@ -740,7 +738,8 @@ disable_shadowsocks() { echo "----------------------------------------------------------------" echo pause - sed -i "31s/true/false/" $backup + # sed -i "31s/true/false/" $backup + backup_config -ss del_port $ssport shadowsocks='' config @@ -878,7 +877,8 @@ change_v2ray_port() { echo "----------------------------------------------------------------" echo pause - sed -i "19s/$v2ray_port/$v2ray_port_opt/" $backup + # sed -i "19s/$v2ray_port/$v2ray_port_opt/" $backup + backup_config v2ray_port del_port $v2ray_port open_port $v2ray_port_opt v2ray_port=$v2ray_port_opt @@ -1024,13 +1024,15 @@ change_v2ray_transport() { fi fi if [[ $is_ws_path ]]; then - sed -i "41s/true/false/" $backup + # sed -i "41s/true/false/" $backup + backup_config -ws_path fi elif [[ $v2ray_transport -ge 9 ]]; then del_port "multiport" fi open_port "multiport" - sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup + # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup + backup_config v2ray_transport v2ray_dynamicPort_start v2ray_dynamicPort_end port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}" config clear @@ -1038,7 +1040,8 @@ change_v2ray_transport() { view_v2ray_config_info download_v2ray_config_ask else - sed -i "17s/$v2ray_transport/$v2ray_transport_opt/" $backup + # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/" $backup + backup_config v2ray_transport if [[ $v2ray_transport == 4 ]]; then del_port "80" del_port "443" @@ -1058,7 +1061,8 @@ change_v2ray_transport() { fi fi if [[ $is_ws_path ]]; then - sed -i "41s/true/false/" $backup + # sed -i "41s/true/false/" $backup + backup_config -ws_path fi elif [[ $v2ray_transport -ge 9 ]]; then del_port "multiport" @@ -1121,11 +1125,14 @@ ws_config() { ws_path_config_ask pause domain_check - sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup + # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup + backup_config v2ray_transport domain if [[ $new_ws_path ]]; then - sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup - echo "$proxy_site" >>$backup + # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + # echo "$proxy_site" >>$backup + backup_config +ws_path ws_path=$new_ws_path + proxy_site=$new_proxy_site is_ws_path=true fi @@ -1176,11 +1183,14 @@ ws_config() { ws_path_config_ask pause domain_check - sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/; 29s/false/true/" $backup + # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/; 29s/false/true/" $backup + backup_config v2ray_transport domain caddy if [[ $new_ws_path ]]; then - sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup - echo "$proxy_site" >>$backup + # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + # echo "$proxy_site" >>$backup + backup_config +ws_path ws_path=$new_ws_path + proxy_site=$new_proxy_site is_ws_path=true fi if [[ $v2ray_transport -ge 9 ]]; then @@ -1206,7 +1216,8 @@ ws_config() { echo pause domain_check - sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup + # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup + backup_config v2ray_transport domain if [[ $v2ray_transport -ge 9 ]]; then del_port "multiport" fi @@ -1263,9 +1274,9 @@ ws_path_config() { [[ -z $new_ws_path ]] && new_ws_path="233blog" case $new_ws_path in - */*) + *[/$]*) echo - echo -e " 由于这个脚本太辣鸡了..所以不能包含 $red/$none 这个符号.... " + echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... " echo error ;; @@ -1285,18 +1296,24 @@ proxy_site_config() { echo while :; do echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com" - echo -e "举例...你当前的域名是$green $domain $none, 伪装的网址的是 https://liyafly.com" + echo -e "举例...假设你当前的域名是$green $domain $none, 伪装的网址的是 https://liyafly.com" echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" echo -e "其实就是一个反代...明白就好..." echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" - read -p "$(echo -e "(默认: [${cyan}https://liyafly.com$none]):")" proxy_site - [[ -z $proxy_site ]] && proxy_site="https://liyafly.com" + read -p "$(echo -e "(默认: [${cyan}https://liyafly.com$none]):")" new_proxy_site + [[ -z $new_proxy_site ]] && new_proxy_site="https://liyafly.com" - case $proxy_site in + case $new_proxy_site in + *[#$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含$red # $none或$red $ $none这两个符号.... " + echo + error + ;; *) echo echo - echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none" + echo -e "$yellow 伪装的网址 = ${cyan}${new_proxy_site}$none" echo "----------------------------------------------------------------" echo break @@ -1363,7 +1380,7 @@ install_caddy() { caddy_config() { local email=$(shuf -i1-10000000000 -n1) if [[ $is_ws_path ]]; then - [[ -z $proxy_site ]] && proxy_site=$(sed '$!d' $backup) + # [[ -z $proxy_site ]] && proxy_site=$(sed '$!d' $backup) cat >/etc/caddy/Caddyfile <<-EOF $domain { tls ${email}@gmail.com @@ -1485,12 +1502,13 @@ change_v2ray_dynamicport() { pause del_port "multiport" open_port "multiport" - sed -i "23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup + # sed -i "23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup + backup_config v2ray_dynamicPort_start v2ray_dynamicPort_end port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}" config # clear echo - echo -e "$green 动态端口修改成功啦...你不需要修改 V2Ray 客户端配置...保持原有的配置即可..." + echo -e "$green 动态端口修改成功啦...你不需要修改 V2Ray 客户端配置...保持原有的配置即可...$none" echo else echo @@ -1625,7 +1643,8 @@ change_v2ray_id() { echo "----------------------------------------------------------------" echo pause - sed -i "21s/$v2ray_id/$uuid/;" $backup + # sed -i "21s/$v2ray_id/$uuid/;" $backup + backup_config uuid v2ray_id=$uuid config clear @@ -1687,7 +1706,8 @@ change_domain() { echo pause domain_check - sed -i "27s/$domain/$new_domain/" $backup + # sed -i "27s/$domain/$new_domain/" $backup + backup_config domain domain=$new_domain caddy_config config @@ -1732,9 +1752,9 @@ change_ws_path_config() { echo error ;; - */*) + *[/$]*) echo - echo -e " 由于这个脚本太辣鸡了..所以不能包含 $red/$none 这个符号.... " + echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... " echo error ;; @@ -1749,7 +1769,8 @@ change_ws_path_config() { esac done pause - sed -i "43s/$ws_path/$new_ws_path/" $backup + # sed -i "43s/$ws_path/$new_ws_path/" $backup + backup_config ws_path ws_path=$new_ws_path caddy_config config @@ -1759,9 +1780,11 @@ change_ws_path_config() { elif [[ $v2ray_transport == 4 && $caddy_installed ]]; then ws_path_config_ask if [[ $new_ws_path ]]; then - sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup - echo "$proxy_site" >>$backup + # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + # echo "$proxy_site" >>$backup + backup_config +ws_path ws_path=$new_ws_path + proxy_site=$new_proxy_site is_ws_path=true caddy_config config @@ -1802,14 +1825,20 @@ change_proxy_site_config() { echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" echo -e "其实就是一个反代...明白就好..." echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" - read -p "$(echo -e "(当前伪装的网址: [${cyan}$(sed '$!d' $backup)$none]):")" proxy_site - [[ -z $proxy_site ]] && error && continue + read -p "$(echo -e "(当前伪装的网址: [${cyan}${proxy_site}$none]):")" new_proxy_site + [[ -z $new_proxy_site ]] && error && continue - case $proxy_site in + case $new_proxy_site in + *[#$]*) + echo + echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含$red # $none或$red $ $none这两个符号.... " + echo + error + ;; *) echo echo - echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none" + echo -e "$yellow 伪装的网址 = ${cyan}${new_proxy_site}$none" echo "----------------------------------------------------------------" echo break @@ -1817,8 +1846,10 @@ change_proxy_site_config() { esac done pause - sed -i "$ d" $backup - echo "$proxy_site" >>$backup + # sed -i "$ d" $backup + # echo "$proxy_site" >>$backup + backup_config proxy_site + proxy_site=$new_proxy_site caddy_config echo echo @@ -1830,9 +1861,11 @@ change_proxy_site_config() { elif [[ $v2ray_transport == 4 && $caddy_installed ]]; then ws_path_config_ask if [[ $new_ws_path ]]; then - sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup - echo "$proxy_site" >>$backup + # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup + # echo "$proxy_site" >>$backup + backup_config +ws_path ws_path=$new_ws_path + proxy_site=$new_proxy_site is_ws_path=true caddy_config config @@ -1895,7 +1928,8 @@ disable_ws_path() { echo "----------------------------------------------------------------" echo pause - sed -i "41s/true/false/" $backup + # sed -i "41s/true/false/" $backup + backup_config -ws_path is_ws_path='' caddy_config config @@ -1972,7 +2006,8 @@ blocked_hosts() { echo "----------------------------------------------------------------" echo pause - sed -i "39s/false/true/" $backup + # sed -i "39s/false/true/" $backup + backup_config +ad is_blocked_ad=true config echo @@ -1990,7 +2025,8 @@ blocked_hosts() { echo "----------------------------------------------------------------" echo pause - sed -i "39s/true/false/" $backup + # sed -i "39s/true/false/" $backup + backup_config -ad is_blocked_ad='' config echo @@ -2019,14 +2055,21 @@ change_v2ray_alterId() { read -p "$(echo -e "(当前数值是: ${cyan}$alterId$none):") " new_alterId [[ -z $new_alterId ]] && error && continue case $new_alterId in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) + $alterId) + echo + echo -e " 大佬...跟 当前 alterId 一毛一样啊...修改个鸡鸡哦 " + echo + error + ;; + [0-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) echo echo echo -e "$yellow alterId = $cyan$new_alterId$none" echo "----------------------------------------------------------------" echo pause - sed -i "45s/$alterId/$new_alterId/" $backup + # sed -i "45s/$alterId/$new_alterId/" $backup + backup_config alterId alterId=$new_alterId config clear @@ -2649,7 +2692,7 @@ update_v2ray() { fi } update_v2ray.sh() { - local latest_version=$(curl -s -L https://raw.githubusercontent.com/233boy/v2ray/master/v2ray.sh | grep '_version' -m1 | cut -d\" -f2) + local latest_version=$(curl -s -L https://raw.githubusercontent.com/233boy/v2ray/test/v2ray.sh | grep '_version' -m1 | cut -d\" -f2) if [[ $latest_version == $_version ]]; then echo echo -e "$green 木有发现新版本 $none" @@ -3422,7 +3465,8 @@ config() { if [[ $new_shadowsocks ]]; then open_port $new_ssport - sed -i "31s/false/true/; 33s/$ssport/$new_ssport/; 35s/$sspass/$new_sspass/; 37s/$ssciphers/$new_ssciphers/" $backup + # sed -i "31s/false/true/; 33s/$ssport/$new_ssport/; 35s/$sspass/$new_sspass/; 37s/$ssciphers/$new_ssciphers/" $backup + backup_config +ss fi if [[ $v2ray_port == "80" ]]; then @@ -3436,6 +3480,70 @@ config() { fi do_service restart v2ray } +backup_config() { + for keys in $*; do + case $keys in + v2ray_transport) + sed -i "18s/=$v2ray_transport/=$v2ray_transport_opt/" $backup + ;; + v2ray_port) + sed -i "21s/=$v2ray_port/=$v2ray_port_opt/" $backup + ;; + uuid) + sed -i "24s/=$v2ray_id/=$uuid/" $backup + ;; + alterId) + sed -i "27s/=$alterId/=$new_alterId/" $backup + ;; + v2ray_dynamicPort_start) + sed -i "30s/=$v2ray_dynamicPort_start/=$v2ray_dynamic_port_start_input/" $backup + ;; + v2ray_dynamicPort_end) + sed -i "33s/=$v2ray_dynamicPort_end/=$v2ray_dynamic_port_end_input/" $backup + ;; + domain) + sed -i "36s/=$domain/=$new_domain/" $backup + ;; + caddy) + sed -i "39s/=/=true/" $backup + ;; + +ss) + sed -i "42s/=/=true/; 45s/=$ssport/=$new_ssport/; 48s/=$sspass/=$new_sspass/; 51s/=$ssciphers/=$new_ssciphers/" $backup + ;; + -ss) + sed -i "42s/=true/=/" $backup + ;; + ssport) + sed -i "45s/=$ssport/=$new_ssport/" $backup + ;; + sspass) + sed -i "48s/=$sspass/=$new_sspass/" $backup + ;; + ssciphers) + sed -i "51s/=$ssciphers/=$new_ssciphers/" $backup + ;; + +ad) + sed -i "54s/=/=true/" $backup + ;; + -ad) + sed -i "54s/=true/=/" $backup + ;; + +ws_path) + sed -i "57s/=/=true/; 60s/=$ws_path/=$new_ws_path/; 63s#=$proxy_site#=$new_proxy_site#" $backup + ;; + -ws_path) + sed -i "57s/=true/=/" $backup + ;; + ws_path) + sed -i "60s/=$ws_path/=$new_ws_path/" $backup + ;; + proxy_site) + sed -i "63s#=$proxy_site#=$new_proxy_site#" $backup + ;; + esac + done + +} _boom_() { echo echo -e "$green ........... V2Ray 配置链接集合 by 233blog.com ..........$none" @@ -3688,6 +3796,7 @@ stop) stop_v2ray ;; restart) + [[ $v2ray_transport == "4" && $caddy_installed ]] && do_service restart caddy restart_v2ray ;; reload)