diff --git a/config/client/vless_ws_tls.json b/config/client/vless_ws_tls.json
new file mode 100644
index 0000000..f9881c9
--- /dev/null
+++ b/config/client/vless_ws_tls.json
@@ -0,0 +1,150 @@
+{
+    "outbounds": [
+        {
+            "protocol": "vless",
+            "settings": {
+                "vnext": [
+                    {
+                        "address": "233blog.com",
+                        "port": 2333,
+                        "users": [
+                            {
+                                "id": "e55c8d17-2cf3-b21a-bcf1-eeacb011ed79",
+                                "encryption": "none",
+                                "security": "auto"
+                            }
+                        ]
+                    }
+                ]
+            },
+            "streamSettings": {
+                "network": "ws",
+                "security": "tls",
+                "tlsSettings": {
+                    "serverName": "233blog.com"
+                },
+                "wsSettings": {
+                    "path": "/233blog",
+                    "headers": {
+                        "Host": "233blog.com"
+                    }
+                }
+            },
+            "mux": {
+                "enabled": true
+            }
+        },
+        {
+            "protocol": "freedom",
+            "settings": {},
+            "tag": "direct"
+        },
+        {
+			"protocol": "blackhole",
+			"settings": {},
+			"tag": "blocked"
+        },
+        {
+            "protocol": "dns",
+            "tag": "dns-out"
+        }
+    ],
+    "inbounds": [
+        {
+            "port": "1099",
+            "protocol": "dokodemo-door",
+            "settings": {
+              "network": "tcp,udp",
+              "timeout": 0,
+              "followRedirect": true
+            },
+            "sniffing": {
+              "enabled": true,
+              "destOverride": ["http", "tls"]
+            }
+        },
+        {
+            "port": 2133,
+            "tag": "dns-in",
+            "protocol": "dokodemo-door",
+            "settings": {
+                "address": "119.29.29.29",
+                "port": 53,
+                "timeout": 0,
+                "network": "tcp,udp"
+            }
+        },
+        {
+            "port": 2333,
+            "protocol": "socks",
+            "settings": {
+                "auth": "noauth",
+                "udp": true
+            }
+        },
+        {
+            "port": 6666,
+            "protocol": "http",
+            "settings": {
+                "auth": "noauth",
+                "udp": true
+            }
+        }
+    ],
+    "dns": {
+        "servers": [
+            {
+                "address": "119.29.29.29",
+                "port": 53,
+                "domains": [
+                  "geosite:cn"
+                ],
+                "expectIPs": [
+                  "geoip:cn"
+                ]
+              },
+              {
+                "address": "1.1.1.1",
+                "port": 53,
+                "domains": [
+                  "geosite:geolocation-!cn"
+                ]
+            },
+            "8.8.8.8",
+            "localhost"
+        ]
+    },
+    "routing": {
+        "domainStrategy": "IPOnDemand",	
+        "rules": [
+            {
+                "type": "field",
+                "inboundTag": [
+                    "dns-in"
+                ],
+                "outboundTag": "dns-out"
+            },
+            {
+				"type": "field",
+				"ip": [
+					"geoip:private"
+				],
+				"outboundTag": "blocked"
+			},
+            {
+                "type": "field",
+                "ip": [
+                    "geoip:cn"
+                ],
+                "outboundTag": "direct"
+            },
+            {
+                "type": "field",
+                "domain": [
+                    "geosite:cn"
+                ],
+                "outboundTag": "direct"
+            }
+        ]
+    }
+}
\ No newline at end of file
diff --git a/config/server/vless_ws.json b/config/server/vless_ws.json
new file mode 100644
index 0000000..fdb9a24
--- /dev/null
+++ b/config/server/vless_ws.json
@@ -0,0 +1,113 @@
+{
+	"log": {
+		"access": "/var/log/v2ray/access.log",
+		"error": "/var/log/v2ray/error.log",
+		"loglevel": "warning"
+	},
+	"inbounds": [
+		{
+			"port": 2333,
+			"protocol": "vless",
+			"settings": {
+				"clients": [
+					{
+						"id": "e55c8d17-2cf3-b21a-bcf1-eeacb011ed79",
+						"level": 1,
+						"alterId": 233
+					}
+				],
+				"decryption": "none"
+			},
+			"listen": "127.0.0.1",
+			"streamSettings": {
+				"network": "ws"
+			},
+			"sniffing": {
+				"enabled": true,
+				"destOverride": [
+					"http",
+					"tls"
+				]
+			}
+		}
+		//include_ss
+		//include_socks
+		//include_mtproto
+		//include_in_config
+		//
+	],
+	"outbounds": [
+		{
+			"protocol": "freedom",
+			"settings": {
+				"domainStrategy": "UseIP"
+			},
+			"tag": "direct"
+		},
+		{
+			"protocol": "blackhole",
+			"settings": {},
+			"tag": "blocked"
+        },
+		{
+			"protocol": "mtproto",
+			"settings": {},
+			"tag": "tg-out"
+		}
+		//include_out_config
+		//
+	],
+	"dns": {
+		"servers": [
+			"https+local://cloudflare-dns.com/dns-query",
+			"1.1.1.1",
+			"1.0.0.1",
+			"8.8.8.8",
+			"8.8.4.4",
+			"localhost"
+		]
+	},
+	"routing": {
+		"domainStrategy": "IPOnDemand",
+		"rules": [
+			{
+				"type": "field",
+				"ip": [
+					"0.0.0.0/8",
+					"10.0.0.0/8",
+					"100.64.0.0/10",
+					"127.0.0.0/8",
+					"169.254.0.0/16",
+					"172.16.0.0/12",
+					"192.0.0.0/24",
+					"192.0.2.0/24",
+					"192.168.0.0/16",
+					"198.18.0.0/15",
+					"198.51.100.0/24",
+					"203.0.113.0/24",
+					"::1/128",
+					"fc00::/7",
+					"fe80::/10"
+				],
+				"outboundTag": "blocked"
+			},
+			{
+				"type": "field",
+				"inboundTag": ["tg-in"],
+				"outboundTag": "tg-out"
+			}
+			//include_ban_xx
+			//include_ban_bt
+			//include_ban_ad
+			//include_rules
+			//
+		]
+	},
+	"transport": {
+		"kcpSettings": {
+            "uplinkCapacity": 100,
+            "downlinkCapacity": 100,
+            "congestion": true
+        }
+	}
+}
\ No newline at end of file
diff --git a/install.sh b/install.sh
index cb5655b..969af25 100644
--- a/install.sh
+++ b/install.sh
@@ -110,6 +110,7 @@ transport=(
 	QUIC_wechat-video_dynamicPort
 	QUIC_dtls_dynamicPort
 	QUIC_wireguard_dynamicPort
+	VLESS_WebSocket_TLS
 )
 
 ciphers=(
@@ -175,7 +176,7 @@ v2ray_config() {
 		read -p "$(echo -e "(默认协议: ${cyan}TCP$none)"):" v2ray_transport
 		[ -z "$v2ray_transport" ] && v2ray_transport=1
 		case $v2ray_transport in
-		[1-9] | [1-2][0-9] | 3[0-2])
+		[1-9] | [1-2][0-9] | 3[0-3])
 			echo
 			echo
 			echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport - 1]}$none"
@@ -192,7 +193,7 @@ v2ray_config() {
 }
 v2ray_port_config() {
 	case $v2ray_transport in
-	4 | 5)
+	4 | 5 | 33)
 		tls_config
 		;;
 	*)
@@ -215,7 +216,7 @@ v2ray_port_config() {
 				;;
 			esac
 		done
-		if [[ $v2ray_transport -ge 18 ]]; then
+		if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 			v2ray_dynamic_port_start
 		fi
 		;;
@@ -331,7 +332,7 @@ tls_config() {
 
 	while :; do
 		echo
-		echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！"
+		echo -e "请输入一个 ${magenta}正确的域名${none}，一定一定一定要正确，不！能！出！错！"
 		read -p "(例如：233blog.com): " domain
 		[ -z "$domain" ] && error && continue
 		echo
@@ -343,11 +344,11 @@ tls_config() {
 	get_ip
 	echo
 	echo
-	echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none"
+	echo -e "$yellow 请将 $magenta$domain$none $yellow 解析到: $cyan$ip$none"
 	echo
-	echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none"
+	echo -e "$yellow 请将 $magenta$domain$none $yellow 解析到: $cyan$ip$none"
 	echo
-	echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none"
+	echo -e "$yellow 请将 $magenta$domain$none $yellow 解析到: $cyan$ip$none"
 	echo "----------------------------------------------------------------"
 	echo
 
@@ -372,7 +373,7 @@ tls_config() {
 
 	done
 
-	if [[ $v2ray_transport -ne 5 ]]; then
+	if [[ $v2ray_transport -eq 4 ]]; then
 		auto_tls_config
 	else
 		caddy=true
@@ -442,7 +443,7 @@ path_config_ask() {
 		N | n)
 			echo
 			echo
-			echo -e "$yellow 网站伪装 和 路径分流 = $cyan不想配置$none"
+			echo -e "$yellow 网站伪装 和 路径分流 = $cyan 不想配置 $none"
 			echo "----------------------------------------------------------------"
 			echo
 			break
@@ -456,7 +457,7 @@ path_config_ask() {
 path_config() {
 	echo
 	while :; do
-		echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可"
+		echo -e "请输入想要 ${magenta} 用来分流的路径 $none , 例如 /233blog , 那么只需要输入 233blog 即可"
 		read -p "$(echo -e "(默认: [${cyan}233blog$none]):")" path
 		[[ -z $path ]] && path="233blog"
 
@@ -483,7 +484,7 @@ path_config() {
 proxy_site_config() {
 	echo
 	while :; do
-		echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
+		echo -e "请输入 ${magenta}一个正确的 $none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
 		echo -e "举例...你当前的域名是 $green$domain$none , 伪装的网址的是 https://liyafly.com"
 		echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
 		echo -e "其实就是一个反代...明白就好..."
@@ -532,7 +533,7 @@ blocked_hosts() {
 			blocked_ad_info="关闭"
 			echo
 			echo
-			echo -e "$yellow 广告拦截 = $cyan关闭$none"
+			echo -e "$yellow 广告拦截 = $cyan 关闭 $none"
 			echo "----------------------------------------------------------------"
 			echo
 			break
@@ -683,7 +684,7 @@ install_info() {
 	echo
 	echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport - 1]}$none"
 
-	if [[ $v2ray_transport == [45] ]]; then
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]]; then
 		echo
 		echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
 		echo
@@ -701,7 +702,7 @@ install_info() {
 			echo
 			echo -e "$yellow 路径分流 = ${cyan}/${path}$none"
 		fi
-	elif [[ $v2ray_transport -ge 18 ]]; then
+	elif [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 		echo
 		echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
 		echo
@@ -826,74 +827,6 @@ install_v2ray() {
 	_mkdir_dir
 }
 
-open_port() {
-	if [[ $cmd == "apt-get" ]]; then
-		if [[ $1 != "multiport" ]]; then
-
-			iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			iptables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-			ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-
-			# firewall-cmd --permanent --zone=public --add-port=$1/tcp
-			# firewall-cmd --permanent --zone=public --add-port=$1/udp
-			# firewall-cmd --reload
-
-		else
-
-			local multiport="${v2ray_dynamic_port_start_input}:${v2ray_dynamic_port_end_input}"
-			iptables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
-			iptables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT
-			ip6tables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
-			ip6tables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT
-
-			# local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
-			# firewall-cmd --permanent --zone=public --add-port=$multi_port/tcp
-			# firewall-cmd --permanent --zone=public --add-port=$multi_port/udp
-			# firewall-cmd --reload
-
-		fi
-		iptables-save >/etc/iptables.rules.v4
-		ip6tables-save >/etc/iptables.rules.v6
-		# else
-		# 	service iptables save >/dev/null 2>&1
-		# 	service ip6tables save >/dev/null 2>&1
-	fi
-}
-del_port() {
-	if [[ $cmd == "apt-get" ]]; then
-		if [[ $1 != "multiport" ]]; then
-			# if [[ $cmd == "apt-get" ]]; then
-			iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			iptables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-			ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-			# else
-			# 	firewall-cmd --permanent --zone=public --remove-port=$1/tcp
-			# 	firewall-cmd --permanent --zone=public --remove-port=$1/udp
-			# fi
-		else
-			# if [[ $cmd == "apt-get" ]]; then
-			local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}"
-			iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
-			iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
-			ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
-			ip6tables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
-			# else
-			# 	local ports="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}"
-			# 	firewall-cmd --permanent --zone=public --remove-port=$ports/tcp
-			# 	firewall-cmd --permanent --zone=public --remove-port=$ports/udp
-			# fi
-		fi
-		iptables-save >/etc/iptables.rules.v4
-		ip6tables-save >/etc/iptables.rules.v6
-		# else
-		# 	service iptables save >/dev/null 2>&1
-		# 	service ip6tables save >/dev/null 2>&1
-	fi
-
-}
-
 config() {
 	cp -f /etc/v2ray/233boy/v2ray/config/backup.conf $backup
 	cp -f /etc/v2ray/233boy/v2ray/v2ray.sh $_v2ray_sh
@@ -902,40 +835,29 @@ config() {
 	v2ray_id=$uuid
 	alterId=0
 	ban_bt=true
-	if [[ $v2ray_transport -ge 18 ]]; then
+	if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 		v2ray_dynamicPort_start=${v2ray_dynamic_port_start_input}
 		v2ray_dynamicPort_end=${v2ray_dynamic_port_end_input}
 	fi
 	_load config.sh
 
-	if [[ $cmd == "apt-get" ]]; then
-		cat >/etc/network/if-pre-up.d/iptables <<-EOF
-			#!/bin/sh
-			/sbin/iptables-restore < /etc/iptables.rules.v4
-			/sbin/ip6tables-restore < /etc/iptables.rules.v6
-		EOF
-		chmod +x /etc/network/if-pre-up.d/iptables
-		# else
-		# 	[ $(pgrep "firewall") ] && systemctl stop firewalld
-		# 	systemctl mask firewalld
-		# 	systemctl disable firewalld
-		# 	systemctl enable iptables
-		# 	systemctl enable ip6tables
-		# 	systemctl start iptables
-		# 	systemctl start ip6tables
-	fi
-
-	[[ $shadowsocks ]] && open_port $ssport
-	if [[ $v2ray_transport == [45] ]]; then
-		open_port "80"
-		open_port "443"
-		open_port $v2ray_port
-	elif [[ $v2ray_transport -ge 18 ]]; then
-		open_port $v2ray_port
-		open_port "multiport"
-	else
-		open_port $v2ray_port
-	fi
+	# if [[ $cmd == "apt-get" ]]; then
+	# 	cat >/etc/network/if-pre-up.d/iptables <<-EOF
+	# 		#!/bin/sh
+	# 		/sbin/iptables-restore < /etc/iptables.rules.v4
+	# 		/sbin/ip6tables-restore < /etc/iptables.rules.v6
+	# 	EOF
+	# 	chmod +x /etc/network/if-pre-up.d/iptables
+	# 	# else
+	# 	# 	[ $(pgrep "firewall") ] && systemctl stop firewalld
+	# 	# 	systemctl mask firewalld
+	# 	# 	systemctl disable firewalld
+	# 	# 	systemctl enable iptables
+	# 	# 	systemctl enable ip6tables
+	# 	# 	systemctl start iptables
+	# 	# 	systemctl start ip6tables
+	# fi
+	
 	# systemctl restart v2ray
 	do_service restart v2ray
 	backup_config
@@ -944,13 +866,13 @@ config() {
 
 backup_config() {
 	sed -i "18s/=1/=$v2ray_transport/; 21s/=2333/=$v2ray_port/; 24s/=$old_id/=$uuid/" $backup
-	if [[ $v2ray_transport -ge 18 ]]; then
+	if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 		sed -i "30s/=10000/=$v2ray_dynamic_port_start_input/; 33s/=20000/=$v2ray_dynamic_port_end_input/" $backup
 	fi
 	if [[ $shadowsocks ]]; then
 		sed -i "42s/=/=true/; 45s/=6666/=$ssport/; 48s/=233blog.com/=$sspass/; 51s/=chacha20-ietf/=$ssciphers/" $backup
 	fi
-	[[ $v2ray_transport == [45] ]] && sed -i "36s/=233blog.com/=$domain/" $backup
+	[[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && sed -i "36s/=233blog.com/=$domain/" $backup
 	[[ $caddy ]] && sed -i "39s/=/=true/" $backup
 	[[ $ban_ad ]] && sed -i "54s/=/=true/" $backup
 	if [[ $is_path ]]; then
@@ -979,7 +901,7 @@ error() {
 
 pause() {
 
-	read -rsp "$(echo -e "按$green Enter 回车键 $none继续....或按$red Ctrl + C $none取消.")" -d $'\n'
+	read -rsp "$(echo -e "按 $green Enter 回车键 $none 继续....或按 $red Ctrl + C $none 取消.")" -d $'\n'
 	echo
 }
 do_service() {
diff --git a/src/caddy-config.sh b/src/caddy-config.sh
index b487bbb..b7ed92b 100644
--- a/src/caddy-config.sh
+++ b/src/caddy-config.sh
@@ -1,7 +1,7 @@
 # local email=$(((RANDOM << 22)))
 # tls ${email}@gmail.com
 case $v2ray_transport in
-4)
+4|33)
 	if [[ $is_path ]]; then
 		cat >/etc/caddy/Caddyfile <<-EOF
 $domain {
diff --git a/src/download-caddy.sh b/src/download-caddy.sh
index 3dbd917..fe41a0d 100644
--- a/src/download-caddy.sh
+++ b/src/download-caddy.sh
@@ -24,7 +24,7 @@ _download_caddy_file() {
 	fi
 }
 _install_caddy_service() {
-	setcap CAP_NET_BIND_SERVICE=+eip /usr/local/bin/caddy
+	# setcap CAP_NET_BIND_SERVICE=+eip /usr/local/bin/caddy
 
 	if [[ $systemd ]]; then
 		cp -f ${caddy_tmp}init/linux-systemd/caddy.service /lib/systemd/system/
@@ -35,7 +35,7 @@ _install_caddy_service() {
 		if [[ ! $(grep "ReadWriteDirectories" /lib/systemd/system/caddy.service) ]]; then
 			sed -i "/ReadWritePaths/a ReadWriteDirectories=/etc/ssl/caddy" /lib/systemd/system/caddy.service
 		fi
-		# # sed -i "s/www-data/root/g" /lib/systemd/system/caddy.service
+		sed -i "s/www-data/root/g" /lib/systemd/system/caddy.service
 		# sed -i "/on-abnormal/a RestartSec=3" /lib/systemd/system/caddy.service
 		# sed -i "s/on-abnormal/always/" /lib/systemd/system/caddy.service
 
@@ -67,23 +67,23 @@ _install_caddy_service() {
 		systemctl enable caddy
 	else
 		cp -f ${caddy_tmp}init/linux-sysvinit/caddy /etc/init.d/caddy
-		# sed -i "s/www-data/root/g" /etc/init.d/caddy
+		sed -i "s/www-data/root/g" /etc/init.d/caddy
 		chmod +x /etc/init.d/caddy
 		update-rc.d -f caddy defaults
 	fi
 
-	if [ -z "$(grep www-data /etc/passwd)" ]; then
-		useradd -M -s /usr/sbin/nologin www-data
-	fi
+	# if [ -z "$(grep www-data /etc/passwd)" ]; then
+	# 	useradd -M -s /usr/sbin/nologin www-data
+	# fi
 	# chown -R www-data.www-data /etc/ssl/caddy
 
 	# ref https://github.com/caddyserver/caddy/tree/master/dist/init/linux-systemd
 
 	mkdir -p /etc/caddy
-	chown -R root:root /etc/caddy
+	# chown -R root:root /etc/caddy
 	mkdir -p /etc/ssl/caddy
-	chown -R root:www-data /etc/ssl/caddy
-	chmod 0770 /etc/ssl/caddy
+	# chown -R root:www-data /etc/ssl/caddy
+	# chmod 0770 /etc/ssl/caddy
 
 	## create sites dir
 	mkdir -p /etc/caddy/sites
diff --git a/src/mtproto.sh b/src/mtproto.sh
index a1f940f..0ce939f 100644
--- a/src/mtproto.sh
+++ b/src/mtproto.sh
@@ -1,3 +1,12 @@
+###----
+echo
+echo -e "$red V2RAY Telegram MTProto 相关配置暂时不推荐使用 $none"
+echo
+echo -e "$green 推荐使用 https://github.com/cutelua/mtg-dist $none"
+echo
+exit
+###----
+
 _view_mtproto_info() {
 	if [[ $mtproto ]]; then
 		_mtproto_info
diff --git a/src/ss-info.sh b/src/ss-info.sh
index 571091c..d3f6c17 100644
--- a/src/ss-info.sh
+++ b/src/ss-info.sh
@@ -14,9 +14,9 @@ if [[ $shadowsocks ]]; then
 	echo
 	echo -e "$yellow SS 链接 = ${cyan}$ss$none"
 	echo
-	echo -e " 备注:$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该 SS 链接"
+	echo -e " 备注: $red Shadowsocks Win 4.0.6 $none 客户端可能无法识别该 SS 链接"
 	echo
-	echo -e "提示: 输入$cyan v2ray ssqr $none可生成 Shadowsocks 二维码链接"	
+	echo -e "提示: 输入 $cyan v2ray ssqr $none 可生成 Shadowsocks 二维码链接"	
 	echo
 	echo -e "${yellow}免被墙..推荐使用JMS: ${cyan}https://getjms.com${none}"
 	echo
diff --git a/src/transport.sh b/src/transport.sh
index 20d4614..afc8d09 100644
--- a/src/transport.sh
+++ b/src/transport.sh
@@ -31,4 +31,5 @@ transport=(
 	QUIC_wechat-video_dynamicPort
 	QUIC_dtls_dynamicPort
 	QUIC_wireguard_dynamicPort
+	VLESS_WebSocket_TLS
 )
diff --git a/src/uninstall.sh b/src/uninstall.sh
index a2e881b..37fcef5 100644
--- a/src/uninstall.sh
+++ b/src/uninstall.sh
@@ -58,28 +58,28 @@ if [[ $is_uninstall_v2ray && $is_uninstall_caddy ]]; then
 	pause
 	echo
 
-	if [[ $shadowsocks ]]; then
-		del_port $ssport
-	fi
-	if [[ $socks ]]; then
-		del_port $socks_port
-	fi
-	if [[ $mtproto ]]; then
-		del_port $mtproto_port
-	fi
-
-	if [[ $v2ray_transport == [45] ]]; then
-		del_port "80"
-		del_port "443"
-		del_port $v2ray_port
-	elif [[ $v2ray_transport -ge 18 ]]; then
-		del_port $v2ray_port
-		del_port "multiport"
-	else
-		del_port $v2ray_port
-	fi
-
-	[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables
+	# if [[ $shadowsocks ]]; then
+	# 	del_port $ssport
+	# fi
+	# if [[ $socks ]]; then
+	# 	del_port $socks_port
+	# fi
+	# if [[ $mtproto ]]; then
+	# 	del_port $mtproto_port
+	# fi
+
+	# if [[ $v2ray_transport == [45] ]]; then
+	# 	del_port "80"
+	# 	del_port "443"
+	# 	del_port $v2ray_port
+	# elif [[ $v2ray_transport -ge 18 ]]; then
+	# 	del_port $v2ray_port
+	# 	del_port "multiport"
+	# else
+	# 	del_port $v2ray_port
+	# fi
+
+	[[ -f /etc/network/if-pre-up.d/iptables ]] && rm -rf /etc/network/if-pre-up.d/iptables
 
 	# [ $v2ray_pid ] && systemctl stop v2ray
 	[ $v2ray_pid ] && do_service stop v2ray
@@ -121,28 +121,28 @@ elif [[ $is_uninstall_v2ray ]]; then
 	pause
 	echo
 
-	if [[ $shadowsocks ]]; then
-		del_port $ssport
-	fi
-	if [[ $socks ]]; then
-		del_port $socks_port
-	fi
-	if [[ $mtproto ]]; then
-		del_port $mtproto_port
-	fi
-
-	if [[ $v2ray_transport == [45] ]]; then
-		del_port "80"
-		del_port "443"
-		del_port $v2ray_port
-	elif [[ $v2ray_transport -ge 18 ]]; then
-		del_port $v2ray_port
-		del_port "multiport"
-	else
-		del_port $v2ray_port
-	fi
-
-	[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables
+	# if [[ $shadowsocks ]]; then
+	# 	del_port $ssport
+	# fi
+	# if [[ $socks ]]; then
+	# 	del_port $socks_port
+	# fi
+	# if [[ $mtproto ]]; then
+	# 	del_port $mtproto_port
+	# fi
+
+	# if [[ $v2ray_transport == [45] ]]; then
+	# 	del_port "80"
+	# 	del_port "443"
+	# 	del_port $v2ray_port
+	# elif [[ $v2ray_transport -ge 18 ]]; then
+	# 	del_port $v2ray_port
+	# 	del_port "multiport"
+	# else
+	# 	del_port $v2ray_port
+	# fi
+
+	[[ -f /etc/network/if-pre-up.d/iptables ]] && rm -rf /etc/network/if-pre-up.d/iptables
 
 	# [ $v2ray_pid ] && systemctl stop v2ray
 	[ $v2ray_pid ] && do_service stop v2ray
diff --git a/src/v2ray-info.sh b/src/v2ray-info.sh
index 18f6c2a..3386fa8 100644
--- a/src/v2ray-info.sh
+++ b/src/v2ray-info.sh
@@ -15,7 +15,7 @@ _v2_args() {
 		header="http"
 		host="www.baidu.com"
 		;;
-	3 | 4 | 20)
+	3 | 4 | 20 | 33)
 		net="ws"
 		;;
 	5)
@@ -96,7 +96,35 @@ _v2_info() {
 		echo
 		echo -e "$yellow 路径 (path) = ${cyan}${_path}$none"
 		echo
-		echo -e "$yellow TLS (Enable TLS) = ${cyan}打开$none"
+		echo -e "$yellow 底层传输安全 (TLS) = ${cyan}tls$none"
+		echo
+		if [[ $ban_ad ]]; then
+			echo " 备注: 广告拦截已开启.."
+			echo
+		fi
+	elif [[ $v2ray_transport == 33 ]]; then
+		echo
+		echo -e "$green ---提示..这是 VLESS 服务器配置--- $none"
+		echo
+		echo -e "$yellow 地址 (Address) = $cyan${domain}$none"
+		echo
+		echo -e "$yellow 端口 (Port) = ${cyan}443${none}"
+		echo
+		echo -e "$yellow 用户ID (User ID / UUID) = $cyan${v2ray_id}$none"
+		echo
+		echo -e "$yellow 流控 (Flow) = ${cyan}空${none}"
+		echo
+		echo -e "$yellow 加密 (Encryption) = ${cyan}none${none}"
+		echo
+		echo -e "$yellow 传输协议 (Network) = ${cyan}${net}$none"
+		echo
+		echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none"
+		echo
+		echo -e "$yellow 伪装域名 (host) = ${cyan}${domain}$none"
+		echo
+		echo -e "$yellow 路径 (path) = ${cyan}${_path}$none"
+		echo
+		echo -e "$yellow 底层传输安全 (TLS) = ${cyan}tls$none"
 		echo
 		if [[ $ban_ad ]]; then
 			echo " 备注: 广告拦截已开启.."
@@ -131,7 +159,7 @@ _v2_info() {
 	echo
 	echo "V2Ray 客户端使用教程: https://233v2.com/post/4/"
 	echo
-	echo -e "提示: 输入$cyan v2ray url $none可生成 vmess URL 链接 / 输入$cyan v2ray qr $none可生成二维码链接"
+	echo -e "提示: 输入 $cyan v2ray url $none 可生成 vmess URL 链接 / 输入 $cyan v2ray qr $none 可生成二维码链接"
 	echo
 	echo -e "${yellow}免被墙..推荐使用JMS: ${cyan}https://getjms.com${none}"
 	echo
diff --git a/src/vmess-config.sh b/src/vmess-config.sh
index cb7e1f6..0654999 100644
--- a/src/vmess-config.sh
+++ b/src/vmess-config.sh
@@ -44,6 +44,10 @@ case $v2ray_transport in
 	v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/dynamic/kcp.json"
 	v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
 	;;
+33)
+	v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/vless_ws.json"
+	v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/vless_ws_tls.json"
+	;;
 *)
 	v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/dynamic/quic.json"
 	v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/quic.json"
@@ -58,7 +62,7 @@ cp -f $v2ray_client_config_file $v2ray_client_config
 sed -i "9s/2333/$v2ray_port/; 14s/$old_id/$v2ray_id/; 16s/233/$alterId/" $v2ray_server_config
 
 # change dynamic port
-if [[ $v2ray_transport -ge 18 ]]; then
+if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 	local multi_port="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}"
 	sed -i "s/10000-20000/$multi_port/" $v2ray_server_config
 fi
@@ -97,7 +101,7 @@ esac
 
 ## change client config file
 [[ -z $ip ]] && get_ip
-if [[ $v2ray_transport == [45] ]]; then
+if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]]; then
 	sed -i "s/233blog.com/$domain/; 9s/2333/443/; 12s/$old_id/$v2ray_id/; 13s/233/$alterId/" $v2ray_client_config
 	if [[ $is_path ]]; then
 		sed -i "27s/233blog/$path/" $v2ray_client_config
diff --git a/v2ray.sh b/v2ray.sh
index c55ffa0..2ad0d8d 100644
--- a/v2ray.sh
+++ b/v2ray.sh
@@ -10,7 +10,7 @@ none='\e[0m'
 # Root
 [[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1
 
-_version="v3.37"
+_version="v3.40"
 
 cmd="apt-get"
 
@@ -69,7 +69,7 @@ fi
 if [[ $mark != "v3" ]]; then
 	. /etc/v2ray/233boy/v2ray/tools/v3.sh
 fi
-if [[ $v2ray_transport -ge 18 ]]; then
+if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 	dynamicPort=true
 	port_range="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}"
 fi
@@ -103,7 +103,7 @@ if [ $v2ray_pid ]; then
 else
 	v2ray_status="$red未在运行$none"
 fi
-if [[ $v2ray_transport == [45] && $caddy ]] && [[ $caddy_pid ]]; then
+if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy_pid && $caddy ]]; then
 	caddy_run_status="$green正在运行$none"
 else
 	caddy_run_status="$red未在运行$none"
@@ -130,36 +130,36 @@ create_vmess_URL_config() {
 
 	if [[ $v2ray_transport == [45] ]]; then
 		cat >/etc/v2ray/vmess_qr.json <<-EOF
-		{
-			"v": "2",
-			"ps": "233v2.com_${domain}",
-			"add": "${domain}",
-			"port": "443",
-			"id": "${v2ray_id}",
-			"aid": "${alterId}",
-			"net": "${net}",
-			"type": "none",
-			"host": "${domain}",
-			"path": "$_path",
-			"tls": "tls"
-		}
+			{
+				"v": "2",
+				"ps": "233v2.com_${domain}",
+				"add": "${domain}",
+				"port": "443",
+				"id": "${v2ray_id}",
+				"aid": "${alterId}",
+				"net": "${net}",
+				"type": "none",
+				"host": "${domain}",
+				"path": "$_path",
+				"tls": "tls"
+			}
 		EOF
 	else
 		[[ -z $ip ]] && get_ip
 		cat >/etc/v2ray/vmess_qr.json <<-EOF
-		{
-			"v": "2",
-			"ps": "233v2.com_${ip}",
-			"add": "${ip}",
-			"port": "${v2ray_port}",
-			"id": "${v2ray_id}",
-			"aid": "${alterId}",
-			"net": "${net}",
-			"type": "${header}",
-			"host": "${host}",
-			"path": "",
-			"tls": ""
-		}
+			{
+				"v": "2",
+				"ps": "233v2.com_${ip}",
+				"add": "${ip}",
+				"port": "${v2ray_port}",
+				"id": "${v2ray_id}",
+				"aid": "${alterId}",
+				"net": "${net}",
+				"type": "${header}",
+				"host": "${host}",
+				"path": "",
+				"tls": ""
+			}
 		EOF
 	fi
 }
@@ -301,7 +301,6 @@ shadowsocks_config() {
 			shadowsocks_password_config
 			shadowsocks_ciphers_config
 			pause
-			open_port $new_ssport
 			backup_config +ss
 			ssport=$new_ssport
 			sspass=$new_sspass
@@ -337,7 +336,7 @@ shadowsocks_port_config() {
 			error
 			;;
 		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
-			if [[ $v2ray_transport == [45] ]]; then
+			if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]]; then
 				local tls=ture
 			fi
 			if [[ $tls && $new_ssport == "80" ]] || [[ $tls && $new_ssport == "443" ]]; then
@@ -455,7 +454,7 @@ change_shadowsocks_port() {
 			error
 			;;
 		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
-			if [[ $v2ray_transport == [45] ]]; then
+			if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]]; then
 				local tls=ture
 			fi
 			if [[ $tls && $new_ssport == "80" ]] || [[ $tls && $new_ssport == "443" ]]; then
@@ -488,8 +487,6 @@ change_shadowsocks_port() {
 				echo
 				pause
 				backup_config ssport
-				del_port $ssport
-				open_port $new_ssport
 				ssport=$new_ssport
 				config
 				clear
@@ -601,7 +598,6 @@ disable_shadowsocks() {
 			echo
 			pause
 			backup_config -ss
-			del_port $ssport
 			shadowsocks=''
 			config
 			# clear
@@ -757,8 +753,6 @@ change_v2ray_port() {
 					echo
 					pause
 					backup_config v2ray_port
-					del_port $v2ray_port
-					open_port $v2ray_port_opt
 					v2ray_port=$v2ray_port_opt
 					config
 					clear
@@ -838,7 +832,7 @@ change_v2ray_transport() {
 				echo " 哎呀...跟当前传输协议一毛一样呀...修改个鸡鸡哦"
 				error
 				;;
-			4 | 5)
+			4 | 5 | 33)
 				if [[ $v2ray_port == "80" || $v2ray_port == "443" ]]; then
 					echo
 					echo -e " 抱歉...如果你想要使用${cyan} ${transport[$v2ray_transport_opt - 1]} $none传输协议.. ${red}V2Ray 端口不能为 80 或者 443 ...$none"
@@ -872,7 +866,7 @@ change_v2ray_transport() {
 					break
 				fi
 				;;
-			[1-9] | [1-2][0-9] | 3[0-2])
+			[1-9] | [1-2][0-9] | 3[0-3])
 				echo
 				echo
 				echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none"
@@ -889,14 +883,13 @@ change_v2ray_transport() {
 	done
 	pause
 
-	if [[ $v2ray_transport_opt == [45] ]]; then
+	if [[ $v2ray_transport_opt == [45] || $v2ray_transport_opt == 33 ]]; then
 		tls_config
-	elif [[ $v2ray_transport_opt -ge 18 ]]; then
+	elif [[ $v2ray_transport_opt -ge 18 && $v2ray_transport_opt -ne 33 ]]; then
 		v2ray_dynamic_port_start
 		v2ray_dynamic_port_end
 		pause
 		old_transport
-		open_port "multiport"
 		backup_config v2ray_transport v2ray_dynamicPort_start v2ray_dynamicPort_end
 		port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
 		v2ray_transport=$v2ray_transport_opt
@@ -916,9 +909,7 @@ change_v2ray_transport() {
 
 }
 old_transport() {
-	if [[ $v2ray_transport == [45] ]]; then
-		del_port "80"
-		del_port "443"
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]]; then
 		if [[ $caddy && $caddy_pid ]]; then
 			do_service stop caddy
 			if [[ $systemd ]]; then
@@ -936,8 +927,6 @@ old_transport() {
 		if [[ $is_path ]]; then
 			backup_config -path
 		fi
-	elif [[ $v2ray_transport -ge 18 ]]; then
-		del_port "multiport"
 	fi
 }
 
@@ -946,7 +935,7 @@ tls_config() {
 		echo
 		echo
 		echo
-		echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！"
+		echo -e "请输入一个 ${magenta}正确的域名${none}，一定一定一定要正确，不！能！出！错！"
 		read -p "(例如：233blog.com): " new_domain
 		[ -z "$new_domain" ] && error && continue
 		echo
@@ -958,11 +947,11 @@ tls_config() {
 	get_ip
 	echo
 	echo
-	echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
+	echo -e "$yellow 请将 $magenta$new_domain$none $yellow 解析到: $cyan$ip$none"
 	echo
-	echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
+	echo -e "$yellow 请将 $magenta$new_domain$none $yellow 解析到: $cyan$ip$none"
 	echo
-	echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
+	echo -e "$yellow 请将 $magenta$new_domain$none $yellow 解析到: $cyan$ip$none"
 	echo "----------------------------------------------------------------"
 	echo
 
@@ -999,13 +988,8 @@ tls_config() {
 			is_path=true
 		fi
 
-		if [[ $v2ray_transport -ge 18 ]]; then
-			del_port "multiport"
-		fi
 		domain=$new_domain
 
-		open_port "80"
-		open_port "443"
 		if [[ $systemd ]]; then
 			systemctl enable caddy >/dev/null 2>&1
 		else
@@ -1018,7 +1002,7 @@ tls_config() {
 		view_v2ray_config_info
 		# download_v2ray_config_ask
 	else
-		if [[ $v2ray_transport_opt == 5 ]]; then
+		if [[ $v2ray_transport_opt -ne 4 ]]; then
 			path_config_ask
 			pause
 			domain_check
@@ -1029,13 +1013,8 @@ tls_config() {
 				proxy_site=$new_proxy_site
 				is_path=true
 			fi
-			if [[ $v2ray_transport -ge 18 ]]; then
-				del_port "multiport"
-			fi
 			domain=$new_domain
 			install_caddy
-			open_port "80"
-			open_port "443"
 			v2ray_transport=$v2ray_transport_opt
 			caddy_config
 			config
@@ -1085,13 +1064,8 @@ auto_tls_config() {
 					proxy_site=$new_proxy_site
 					is_path=true
 				fi
-				if [[ $v2ray_transport -ge 18 ]]; then
-					del_port "multiport"
-				fi
 				domain=$new_domain
 				install_caddy
-				open_port "80"
-				open_port "443"
 				v2ray_transport=$v2ray_transport_opt
 				caddy_config
 				config
@@ -1109,12 +1083,7 @@ auto_tls_config() {
 				pause
 				domain_check
 				backup_config v2ray_transport domain
-				if [[ $v2ray_transport -ge 18 ]]; then
-					del_port "multiport"
-				fi
 				domain=$new_domain
-				open_port "80"
-				open_port "443"
 				v2ray_transport=$v2ray_transport_opt
 				config
 				clear
@@ -1144,7 +1113,7 @@ path_config_ask() {
 		N | n)
 			echo
 			echo
-			echo -e "$yellow 网站伪装 和 路径分流 = $cyan不想配置$none"
+			echo -e "$yellow 网站伪装 和 路径分流 = $cyan 不想配置 $none"
 			echo "----------------------------------------------------------------"
 			echo
 			break
@@ -1158,7 +1127,7 @@ path_config_ask() {
 path_config() {
 	echo
 	while :; do
-		echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可"
+		echo -e "请输入想要 ${magenta}用来分流的路径 $none , 例如 /233blog , 那么只需要输入 233blog 即可"
 		read -p "$(echo -e "(默认: [${cyan}233blog$none]):")" new_path
 		[[ -z $new_path ]] && new_path="233blog"
 
@@ -1184,7 +1153,7 @@ path_config() {
 proxy_site_config() {
 	echo
 	while :; do
-		echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
+		echo -e "请输入 ${magenta}一个正确的 $none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
 		echo -e "举例...假设你当前的域名是$green $domain $none, 伪装的网址的是 https://liyafly.com"
 		echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
 		echo -e "其实就是一个反代...明白就好..."
@@ -1340,12 +1309,10 @@ v2ray_dynamic_port_end() {
 
 }
 change_v2ray_dynamicport() {
-	if [[ $v2ray_transport -ge 18 ]]; then
+	if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 		change_v2ray_dynamic_port_start
 		change_v2ray_dynamic_port_end
 		pause
-		del_port "multiport"
-		open_port "multiport"
 		backup_config v2ray_dynamicPort_start v2ray_dynamicPort_end
 		port_range="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
 		config
@@ -1534,10 +1501,10 @@ change_v2ray_id() {
 	done
 }
 change_domain() {
-	if [[ $v2ray_transport == [45] ]] && [[ $caddy ]]; then
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy ]]; then
 		while :; do
 			echo
-			echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！"
+			echo -e "请输入一个 ${magenta}正确的域名${none}，一定一定一定要正确，不！能！出！错！"
 			read -p "$(echo -e "(当前域名: ${cyan}$domain$none):") " new_domain
 			[ -z "$new_domain" ] && error && continue
 			if [[ $new_domain == $domain ]]; then
@@ -1555,11 +1522,11 @@ change_domain() {
 		get_ip
 		echo
 		echo
-		echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
+		echo -e "$yellow 请将 $magenta$new_domain$none $yellow 解析到: $cyan$ip$none"
 		echo
-		echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
+		echo -e "$yellow 请将 $magenta$new_domain$none $yellow 解析到: $cyan$ip$none"
 		echo
-		echo -e "$yellow 请将 $magenta$new_domain$none $yellow解析到: $cyan$ip$none"
+		echo -e "$yellow 请将 $magenta$new_domain$none $yellow 解析到: $cyan$ip$none"
 		echo "----------------------------------------------------------------"
 		echo
 
@@ -1609,7 +1576,7 @@ change_domain() {
 	fi
 }
 change_path_config() {
-	if [[ $v2ray_transport == [45] ]] && [[ $caddy && $is_path ]]; then
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy && $is_path ]]; then
 		echo
 		while :; do
 			echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可"
@@ -1647,7 +1614,7 @@ change_path_config() {
 		clear
 		view_v2ray_config_info
 		# download_v2ray_config_ask
-	elif [[ $v2ray_transport == [45] ]] && [[ $caddy ]]; then
+	elif [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy ]]; then
 		path_config_ask
 		if [[ $new_path ]]; then
 			backup_config +path
@@ -1685,10 +1652,10 @@ change_path_config() {
 
 }
 change_proxy_site_config() {
-	if [[ $v2ray_transport == [45] ]] && [[ $caddy && $is_path ]]; then
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy && $is_path ]]; then
 		echo
 		while :; do
-			echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
+			echo -e "请输入 ${magenta}一个正确的 $none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
 			echo -e "举例...你当前的域名是$green $domain $none, 伪装的网址的是 https://liyafly.com"
 			echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
 			echo -e "其实就是一个反代...明白就好..."
@@ -1724,7 +1691,7 @@ change_proxy_site_config() {
 		echo -e " 赶紧打开你的域名 ${cyan}https://${domain}$none 检查一下看看"
 		echo
 		echo
-	elif [[ $v2ray_transport == [45] ]] && [[ $caddy ]]; then
+	elif [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy ]]; then
 		path_config_ask
 		if [[ $new_path ]]; then
 			backup_config +path
@@ -1780,7 +1747,7 @@ domain_check() {
 	fi
 }
 disable_path() {
-	if [[ $v2ray_transport == [45] ]] && [[ $caddy && $is_path ]]; then
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy && $is_path ]]; then
 		echo
 
 		while :; do
@@ -2201,7 +2168,35 @@ create_v2ray_config_text() {
 		echo
 		echo "路径 (path) = ${_path}"
 		echo
-		echo "TLS (Enable TLS) = 打开"
+		echo "底层传输安全 (TLS) = tls"
+		echo
+		if [[ $ban_ad ]]; then
+			echo " 备注: 广告拦截已开启.."
+			echo
+		fi
+	elif [[ $v2ray_transport == 33 ]]; then
+		echo
+		echo '---提示..这是 VLESS 服务器配置---'
+		echo
+		echo "地址 (Address) = ${domain}"
+		echo
+		echo "端口 (Port) = 443"
+		echo
+		echo "用户ID (User ID / UUID) = ${v2ray_id}"
+		echo
+		echo "流控 (Flow) = 空"
+		echo
+		echo "加密 (Encryption) = none"
+		echo
+		echo "传输协议 (Network) = ${net}"
+		echo
+		echo "伪装类型 (header type) = ${header}"
+		echo
+		echo "伪装域名 (host) = ${domain}"
+		echo
+		echo "路径 (path) = ${_path}"
+		echo
+		echo "底层传输安全 (TLS) = tls"
 		echo
 		if [[ $ban_ad ]]; then
 			echo " 备注: 广告拦截已开启.."
@@ -2223,10 +2218,10 @@ create_v2ray_config_text() {
 		echo "伪装类型 (header type) = ${header}"
 		echo
 	fi
-	if [[ $v2ray_transport -ge 18 ]] && [[ $ban_ad ]]; then
+	if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]] && [[ $ban_ad ]]; then
 		echo "备注: 动态端口已启用...广告拦截已开启..."
 		echo
-	elif [[ $v2ray_transport -ge 18 ]]; then
+	elif [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
 		echo "备注: 动态端口已启用..."
 		echo
 	elif [[ $ban_ad ]]; then
@@ -2342,79 +2337,6 @@ uninstall_lotserver() {
 	rm -rf /tmp/appex.sh
 }
 
-open_port() {
-	if [[ $cmd == "apt-get" ]]; then
-		if [[ $1 != "multiport" ]]; then
-			# if [[ $cmd == "apt-get" ]]; then
-			iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			iptables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-			ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-
-			# iptables-save >/etc/iptables.rules.v4
-			# ip6tables-save >/etc/iptables.rules.v6
-			# else
-			# 	firewall-cmd --permanent --zone=public --add-port=$1/tcp
-			# 	firewall-cmd --permanent --zone=public --add-port=$1/udp
-			# 	firewall-cmd --reload
-			# fi
-		else
-			# if [[ $cmd == "apt-get" ]]; then
-			local multiport="${v2ray_dynamic_port_start_input}:${v2ray_dynamic_port_end_input}"
-			iptables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
-			iptables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT
-			ip6tables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
-			ip6tables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT
-
-			# iptables-save >/etc/iptables.rules.v4
-			# ip6tables-save >/etc/iptables.rules.v6
-			# else
-			# 	local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
-			# 	firewall-cmd --permanent --zone=public --add-port=$multi_port/tcp
-			# 	firewall-cmd --permanent --zone=public --add-port=$multi_port/udp
-			# 	firewall-cmd --reload
-			# fi
-		fi
-		iptables-save >/etc/iptables.rules.v4
-		ip6tables-save >/etc/iptables.rules.v6
-		# else
-		# 	service iptables save >/dev/null 2>&1
-		# 	service ip6tables save >/dev/null 2>&1
-	fi
-
-}
-del_port() {
-	if [[ $cmd == "apt-get" ]]; then
-		if [[ $1 != "multiport" ]]; then
-			# if [[ $cmd == "apt-get" ]]; then
-			iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			iptables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-			ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
-			ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
-			# else
-			# 	firewall-cmd --permanent --zone=public --remove-port=$1/tcp
-			# 	firewall-cmd --permanent --zone=public --remove-port=$1/udp
-			# fi
-		else
-			# if [[ $cmd == "apt-get" ]]; then
-			local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}"
-			iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
-			iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
-			ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
-			ip6tables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
-			# else
-			# 	local ports="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}"
-			# 	firewall-cmd --permanent --zone=public --remove-port=$ports/tcp
-			# 	firewall-cmd --permanent --zone=public --remove-port=$ports/udp
-			# fi
-		fi
-		iptables-save >/etc/iptables.rules.v4
-		ip6tables-save >/etc/iptables.rules.v6
-		# else
-		# 	service iptables save >/dev/null 2>&1
-		# 	service ip6tables save >/dev/null 2>&1
-	fi
-}
 update() {
 	while :; do
 		echo
@@ -2618,7 +2540,7 @@ error() {
 
 pause() {
 
-	read -rsp "$(echo -e "按$green Enter 回车键 $none继续....或按$red Ctrl + C $none取消.")" -d $'\n'
+	read -rsp "$(echo -e "按 $green Enter 回车键 $none 继续....或按 $red Ctrl + C $none 取消.")" -d $'\n'
 	echo
 }
 do_service() {
@@ -2819,7 +2741,7 @@ bt)
 	;;
 status)
 	echo
-	if [[ $v2ray_transport == [45] && $caddy ]]; then
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy ]]; then
 		echo -e " V2Ray 状态: $v2ray_status  /  Caddy 状态: $caddy_run_status"
 	else
 		echo -e " V2Ray 状态: $v2ray_status"
@@ -2833,12 +2755,16 @@ stop)
 	stop_v2ray
 	;;
 restart)
-	[[ $v2ray_transport == [45] && $caddy ]] && do_service restart caddy
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy ]]; then
+		do_service restart caddy
+	fi
 	restart_v2ray
 	;;
 reload)
 	config
-	[[ $v2ray_transport == [45] && $caddy ]] && caddy_config
+	if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && [[ $caddy ]]; then
+		caddy_config
+	fi
 	clear
 	view_v2ray_config_info
 	;;
@@ -2849,6 +2775,12 @@ log)
 	view_v2ray_log
 	;;
 url | URL)
+	if [[ $v2ray_transport == 33 ]]; then
+		echo
+		echo ' V2RAY VLESS 协议相关暂不支持生成 URL ....'
+		echo
+		exit
+	fi
 	get_v2ray_vmess_URL_link
 	;;
 u | update)