support v1.xx update to v2.xx, use [ v2ray link ] get v2ray config link

tools/v1xx_to_v2xx.sh

@@ -0,0 +1,103 @@
+#!/bin/bash
+v2ray_transport=$(sed -n '17p' $backup)
+v2ray_port=$(sed -n '19p' $backup)
+v2ray_id=$(sed -n '21p' $backup)
+v2ray_dynamicPort_start=$(sed -n '23p' $backup)
+v2ray_dynamicPort_end=$(sed -n '25p' $backup)
+domain=$(sed -n '27p' $backup)
+caddy_status=$(sed -n '29p' $backup)
+shadowsocks_status=$(sed -n '31p' $backup)
+ssport=$(sed -n '33p' $backup)
+sspass=$(sed -n '35p' $backup)
+ssciphers=$(sed -n '37p' $backup)
+blocked_ad_status=$(sed -n '39p' $backup)
+ws_path_status=$(sed -n '41p' $backup)
+ws_path=$(sed -n '43p' $backup)
+proxy_site=$(sed '$!d' $backup)
+if [[ $caddy_status == "true" ]]; then
+	caddy_installed=true
+fi
+if [[ $shadowsocks_status == "true" ]]; then
+	shadowsocks=true
+fi
+if [[ $blocked_ad_status == "true" ]]; then
+	is_blocked_ad=true
+fi
+if [[ $ws_path_status == "true" ]]; then
+	is_ws_path=true
+fi
+
+cat >/etc/v2ray/233blog_v2ray_backup.conf <<-EOF
+# -----------------------------------
+# 警告...请不要修改或删除这个文件...谢谢
+# 警告...请不要修改或删除这个文件...谢谢
+# 警告...请不要修改或删除这个文件...谢谢
+# -----------------------------------
+
+# ---- 再次提醒 ----
+# 大胸弟...如果你看到了这个...记得不要修改或更改这个文件
+
+# ---- 说明 ----
+# 嗯……这个文件呢，是用来备份一些设置的
+# 我懒...不想用 JQ 去解析 JSON....
+# 那就把 V2Ray 配置文件的一些重要参数提取出来
+# 然后..在修改 V2Ray 配置的时候再重写一下就 OK 啦...
+# 嗯…笨笨的方法
+
+# ---- V2Ray 传输协议 -----
+v2ray_transport=$v2ray_transport
+
+#---- V2Ray 端口 -----
+v2ray_port=$v2ray_port
+
+#---- UUID -----
+v2ray_id=$v2ray_port
+
+#---- alterId -----
+alterId=233
+
+#---- V2Ray 动态端口开始 -----
+v2ray_dynamicPort_start=$v2ray_dynamicPort_start
+
+#---- V2Ray 动态端口结束 -----
+v2ray_dynamicPort_end=$v2ray_dynamicPort_end
+
+#---- 域名 -----
+domain=$domain
+
+#---- caddy -----
+caddy_status=$caddy_installed
+
+#---- Shadowsocks -----
+shadowsocks_status=$shadowsocks
+
+#---- Shadowsocks 端口 -----
+ssport=$ssport
+
+#---- Shadowsocks 密码 -----
+sspass=$sspass
+
+#---- Shadowsocks 加密协议 -----
+ssciphers=$ssciphers
+
+#---- 屏蔽广告 -----
+blocked_ad_status=$is_blocked_ad
+
+#---- 网站伪装 -----
+ws_path_status=$is_ws_path
+
+#---- 伪装的路径 -----
+ws_path=$ws_path
+
+#---- 伪装的网址 -----
+proxy_site=$proxy_site
+		EOF
+cp -f /etc/v2ray/233boy/v2ray/v2ray.sh /usr/local/bin/v2ray
+chmod +x /usr/local/bin/v2ray
+rm -rf $backup
+echo
+echo -e " 哇哦.. 由于大佬你是从 1.xx 升级到 2.xx 管理脚本的.."
+echo
+echo -e " 请使用命令$yellow v2ray reload $none重新加载配置...以避免发生莫名其妙的问题"
+echo
+exit 1

v2ray.old.sh

@@ -10,7 +10,7 @@ none='\e[0m'
 # Root
 [[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1
 
-_version="v1.72"
+_version="v1.73"
 
 cmd="apt-get"
 
@@ -46,20 +46,7 @@ backup="/etc/v2ray/233blog_v2ray_backup.txt"
 
 if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then
 
-	v2ray_transport=$(sed -n '17p' $backup)
+	. /etc/v2ray/233boy/v2ray/tools/v1xx_to_v2xx.sh
-	v2ray_port=$(sed -n '19p' $backup)
-	v2ray_id=$(sed -n '21p' $backup)
-	v2ray_dynamicPort_start=$(sed -n '23p' $backup)
-	v2ray_dynamicPort_end=$(sed -n '25p' $backup)
-	domain=$(sed -n '27p' $backup)
-	caddy_status=$(sed -n '29p' $backup)
-	shadowsocks_status=$(sed -n '31p' $backup)
-	ssport=$(sed -n '33p' $backup)
-	sspass=$(sed -n '35p' $backup)
-	ssciphers=$(sed -n '37p' $backup)
-	blocked_ad_status=$(sed -n '39p' $backup)
-	ws_path_status=$(sed -n '41p' $backup)
-	ws_path=$(sed -n '43p' $backup)
 
 	v2ray_ver=$(/usr/bin/v2ray/v2ray -version | head -n 1 | cut -d " " -f2)
 

v2ray.sh

@@ -10,7 +10,7 @@ none='\e[0m'
 # Root
 [[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1
 
-_version="v2.02"
+_version="v2.1"
 
 cmd="apt-get"
 
@@ -51,14 +51,8 @@ if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup &
 
 elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then
 
-	cp -f /etc/v2ray/233boy/v2ray/v2ray.old.sh /usr/local/bin/v2ray
+	. /etc/v2ray/233boy/v2ray/tools/v1xx_to_v2xx.sh
-	chmod +x /usr/local/bin/v2ray
+
-	echo
-	echo -e " 哇哦.. 出现了一点小意外.. 当前环境不能使用$cyan v2.0 $none版本以上的管理脚本.. 已自动回退到旧版本"
-	echo
-	echo -e " 请使用命令$yellow v2ray reload $none重新加载配置...以避免发生莫名其妙的问题"
-	echo
-	exit 1
 else
 	echo -e " 哎呀哎呀…… ${red}出错咯...请重新安装V2Ray${none} ${yellow}~(^_^) ${none}" && exit 1
 fi
@@ -2266,15 +2260,16 @@ get_v2ray_config_link() {
 	echo -e "$green 正在生成链接.... 稍等片刻即可....$none"
 	echo
 	local random=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
-	local link=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random}_233blog_v2ray.zip")
+	# local link=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random}_233blog_v2ray.zip")
+	local link=$(curl -s --upload-file $v2ray_client_config "https://transfer.sh/${random}_233blog_v2ray.json")
 	if [[ $link ]]; then
 		echo
 		echo "---------- V2Ray 客户端配置文件链接 -------------"
 		echo
 		echo -e "$yellow 链接 = $cyan$link$none"
 		echo
-		echo -e "$yellow 解压密码 = ${cyan}233blog.com$none"
+		# echo -e "$yellow 解压密码 = ${cyan}233blog.com$none"
-		echo
+		# echo
 		echo -e "$yellow SOCKS 监听端口 = ${cyan}2333${none}"
 		echo
 		echo -e "${yellow} HTTP 监听端口 = ${cyan}6666$none"
@@ -3461,7 +3456,7 @@ config() {
 		sed -i "s/233blog.com/$ip/; 22s/2333/$v2ray_port/; 25s/$old_id/$v2ray_id/; 26s/233/$alterId/" $v2ray_client_config
 	fi
 
-	zip -q -r -j --password "233blog.com" /etc/v2ray/233blog_v2ray.zip $v2ray_client_config
+	# zip -q -r -j --password "233blog.com" /etc/v2ray/233blog_v2ray.zip $v2ray_client_config
 
 	if [[ $new_shadowsocks ]]; then
 		open_port $new_ssport
@@ -3578,7 +3573,8 @@ _boom_() {
 	local random1=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
 	local random2=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
 	local random3=$(echo $RANDOM-$RANDOM-$RANDOM | base64)
-	local link1=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random1}_233blog_v2ray.zip")
+	# local link1=$(curl -s --upload-file /etc/v2ray/233blog_v2ray.zip "https://transfer.sh/${random1}_233blog_v2ray.zip")
+	local link1=$(curl -s --upload-file $v2ray_client_config "https://transfer.sh/${random1}_233blog_v2ray.json")
 	local link2=$(curl -s --upload-file /tmp/233blog_v2ray.txt "https://transfer.sh/${random2}_233blog_v2ray.txt")
 	local link3=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random3}_233blog_v2ray.png")